“Corkscrewed” mesocotyl development in corn

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

Last week Peter Thomison received several reports of abnormal corn emergence. Often the problems were associated with corn seedlings leafing out underground and it’s likely weather and seedbed conditions were responsible for the occurrence of the abnormal growth. Seedlings exhibiting abnormal emergence may have a twisted appearance because internal leaves start expanding before the seeding has elongated. “Corkscrewed” mesocotyl/coleoptile development may occur when the coleoptile encounters resistance (like soil crusting or a dense soil surface) as the mesocotyl elongates. Several factors (or combination of factors) may be responsible for this abnormal growth. These factors may be characterized as environmental, chemical, or mechanical. Environmental conditions associated with underground leafing include light penetration, cold soils, or heavy rains soon after planting. When plants unfurl below the soil surface, they usually turn yellow and die.

In a cloddy field where soil coverage of seed is poor and irregular, sunlight can reach the germinating seedling and induce leaf emergence beneath the soil surface. Also, heavy rains after planting can cause a hard crust, which makes emergence of small seedlings very difficult (this seemed to be the most likely factor causing problems this year). As a result, bending and twisting of the seedling below the crusted layer often occurs. Planting the seed too deep has also been associated with premature unfurling of the corn.

Certain herbicides, such as cell growth inhibitors like acetochlor, and various premixes that contain their active ingredients can show similar symptoms (i.e. twisting, abnormal growth) when excessive rates are applied pre-emergence. Besides excessive rates, improperly closed seed furrows can allow the pre-emergence herbicide to come in direct contact with the seed.

In a 2012 article concerning corn emergence problems (http://www.agry.purdue.edu/ext/corn/news/timeless/Corkscrews.html), Dr. Bob Nielsen at Purdue University notes that cold soils and/or wide fluctuations in soil temperatures throughout the day during the emergence process may be a major contributing factor for the development of corkscrewed mesocotyl. We have also encountered some swings in soil temperatures during emergence in areas where problems occurred.

Corn seedlings that exhibit abnormal unfurling symptoms during emergence will be unable to penetrate any but the loosest soil even if the crust is broken mechanically or softened by rain. Prompt treatment with a rotary hoe, weeder, spiketooth harrow or cultipacker may help break the crust and improve emergence. However, even when used carefully, these salvage operations can cause some damage to seedlings, which are emerging normally. To minimize poor seedling emergence due to unfurling below the soil surface, watch for cloddy seedbeds, open seed furrows, and crusting surface soils after rains.

References

Nielsen, R.L. 2012. Corkscrewed Mesocotyls & Failed Corn Emergence Corny News Network, Purdue Univ. Online at http://www.agry.purdue.edu/ext/corn/news/timeless/Corkscrews.html [URL accessed May 27, 2014]

 

 

 

 


Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left


Smooth Wall Grain Bins

Meridian’s SmoothWall bins are the ultimate storage bins, used to handle and store fertilizer, grain, feed and seed, and extend ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form