Continued support for corn prices

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

Corn prices peaked in August, moved sharply lower in September, and have been in a sideways pattern over the past two months.  Within that sideways pattern, prices have moved higher over the past two weeks, with March 2013 futures trading within $0.10 of the post-September high.  The recent rally has been fueled by some supply concerns and more optimism about near-term demand.

There are two concerns about potential supply of corn in 2013.  First, the on-going wet weather in Argentina may reduce the magnitude of planted area of corn relative to intentions.  Fewer acres would threaten the projected rebound in production.  The USDA has forecast the 2013 harvest at a record 1.1 billion bushels, a third larger than the drought-reduced harvest of earlier this year.  The USDA will update the forecast in the monthly World Agricultural Production report to be released on Dec. 11, but a large change in that forecast is not expected this early in the season.  During last year’s drought, the forecast of production was not reduced in December, but was reduced sharply in January and again in February.  The potential implications of wet weather on acreage and yield are even more difficult to discern than the implications of drought conditions.

The second supply concern is for the upcoming U.S. crop in the face of continuing widespread drought conditions.  The latest U.S. drought monitor map shows exceptional drought conditions in large portions of the Plains states and severe to extreme drought conditions extending to the Mississippi River and in northern Illinois and southern Wisconsin.  Significant drought conditions also persist in some southeastern states.  Very dry soil conditions underscore the need to replenish soil moisture and for timely rain during the 2013 growing season.  The production risk of continuing drought conditions is being balanced against the potential of a record corn harvest if acreage is not reduced and 2013 growing season weather is generally favorable for corn yields.   The balancing act is reflected in futures prices for the 2013 crop that are below old-crop prices, but high by historic standards.

The pace of U.S. corn exports remains very low, but some increase in the demand for U.S. corn is expected yet this marketing year.  Export inspections during the first 13 weeks of the marketing year totaled only 208 million bushels, 48 percent less than cumulative inspections of a year ago.  The weekly rate of inspections needs to increase from the current average of 16 million bushels to 24 million in order to reach the projection of only 1.15 billion bushels for the year.  Unshipped export sales totaled only 278 million bushels as of November 22, 238 million less than on the same date last year.  New sales need to average17 million bushels per week for sales to reach 1.15 billion bushels.  Sales exceeded that average for the two weeks ended November 22 and the more rapid pace may continue as supplies of competing grains are reduced.

Domestically, ethanol production continues to be well below the rapid pace of a year ago.  Production last year, however, was accelerated by the impending end to the blenders’ tax credit.  Through the first quarter of the 2012-13 marketing year, cumulative ethanol production was about nine percent less than during the same period last year.   The USDA has projected a 10 percent decline in the amount of corn used for ethanol production during the current marketing year.  The decline in expected ethanol production reflects the plateauing of domestic consumption, increasing imports from Brazil, and steady to declining exports of ethanol.  The so called blend wall will continue to limit domestic ethanol consumption and production, but corn use this year should at least reach the USDA projection.

The rate of feed use of corn is not known.  The USDA projects use for the year at only 4.15 billion bushels, nearly nine percent less than apparent use of last year.  However, marketing year feed and residual use estimates and projections are confused by the harvest of a large quantity of corn before the start of the 2012-13 marketing year on September 1. Taken together, current livestock inventories, slaughter numbers, and slaughter weights suggest strong overall feed demand.  The number of cattle on feed on November I was five percent less than that of a year ago, but the number of dairy cows during October was only 0.3 percent less.  The placement of broiler-type chicks during the first four weeks of November was only 0.7 percent less than those of a year ago. The average number of layers on hand during October was 1.4 percent more than that of a year earlier.  October hog slaughter was record large and exceeded that of a year ago by 10 percent.  Average cattle and hog slaughter weights in October were near those of a year ago.

The USDA’s December 1 stocks estimate and 2012 final U.S. production estimate to be released on January 11 will add some clarity to corn market fundamentals.  Current conditions point to continued strong corn prices until then.

Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...

Comments (1) Leave a comment 

e-Mail (required)


characters left

Iowa  |  December, 05, 2012 at 09:46 AM

As a grain and livestock farmer I am both excited but also worried about the grain prices. Livestock producers are already running at a loss per animal, and higher grain prices will only start to drive grain usage for feed lower. Grain farmers should not be to excited about price increases because loss of demand is only going to hurt the price of the grain in the long term. Surplus do to lack of demand always causes major decreases in prices, and that could take years to recover from.

Pacesetter Grain Hopper

The Pacesetter Gain Hopper features original and innovative ideas like the patented RollerTrap™, the industry’s easiest to open and maintain trap ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form