Seed in the ground might need replanted

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

COLUMBIA, Mo. –Plummeting temperatures in Missouri could mean poor stands of corn and seed damage.

The unseasonable weather might cause chilling injury to corn seeds prior to emergence, said University of Missouri Extension agronomy specialist Bill Wiebold.

Seeds contain 6-8 percent moisture when they go into the ground, then they rehydrate themselves with moisture from the soil. At low temperatures, the hydration process can rupture seed cell membranes. Cell contents can then leak out and become a food source for invading pathogens, leading to death or injury of the seed.

“It can be devastating,” Wiebold said. Damage during seed imbibition could take out 90 percent of the stand, he said. “We’re going to see it happen this year. Be ready to think about replanting. Seed in the bag is usually not affected by cold temperatures.”

Emerging seedlings may also face field conditions such as crusting. No-till fields typically have lower soil temperatures and greater soil moisture. Well-drained soils fare better than claypan soils.

Producers who haven’t planted corn yet are feeling pressure to start soon to avoid yield losses. Wiebold and MU Extension corn specialist Brent Myers said there is still time to get high yields.

“We’re not at the point where we’re getting significant yield loss yet,” Myers said, “but we’re getting close.”

Declines in yield potential may occur soon, but they will be small until after mid-May.  Corn yield begins to drop when planted after the end of April, but only by 5 percent by May 5 and 13 percent by May 20, according to data from a four-year planting-date study at MU’s Bradford Research Center near Columbia. Yield drops as much as 40 percent when corn is not planted by June 19.  Wiebold and Myers also recommend that farmers stick with 110-day maturing corn through the end of May.

When soil temperature remains below 50 degrees, seeds germinate slowly and can take three to four weeks to emerge.

The U.S. Department of Agriculture’s April 29 planting progress report remained virtually unchanged from the last update, with only 15 percent of Missouri’s corn crop in the ground, most of that in the southern part of the state. This is 24 days behind last year and 15 behind normal, but doesn’t reflect recent planting activity in northern counties.

Temperatures remained 5-9 degrees below average across the state. The four-week average for rainfall was 6.22 inches, with areas in northeastern Missouri getting as much as 7.51 inches.

“This is a spring for the record books,” Wiebold said.


Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left


Elevator Legs

Adams Fertilizer Equipment offers an increasing line of fertilizer handling equipment to meet the needs of today’s industry. Whether it ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form