Aflatoxin less pervasive than expected

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

Despite early concern, very little aflatoxin has been detected in Michigan’s new crop of corn. This is good news for growers who are already struggling with low corn yields, shattered soybeans and pending insurance claims.

Aflatoxins are liver poisons (hepatotoxins) produced by fungi in the genus Aspergillus. They are toxic to all organisms that consume grain, though ruminants such as cattle can tolerate higher concentrations than monogastric species (swine, humans, etc.) or poultry. Aspergillus fungi often colonize filling corn kernels when late summer weather is hot and dry, eventually causing ear mold or ear rot. The 2012 season produced ideal conditions for infection, leading the USDA to suggest pre-harvest testing of drought-damaged crops across the Corn Belt.

This year’s loads of corn grain will also be tested when they reach the elevator. Two different assays are commonly used. Samples are first viewed under a black light. An Aspergillus byproduct called kojic acid fluoresces, glowing a blue-greenish gold under the short-wave ultraviolet light. However, the presence of kojic acid does not necessarily indicate high concentrations of aflatoxin. A second test can confirm the problem by detecting distinct aflatoxin proteins in ground samples.

click image to zoom

Kojic acid produced by Aspergillus fungi under a black light.
Photo credit: Dept. of Plant Pathology Archive, North Carolina State University

As of October 10, some of Michigan’s largest grain buyers, The Andersons Grain Group and Michigan Agricultural Commodities, had yet to detect aflatoxin above the standard 20 ppb (parts per billion) threshold. That said, growers still need to be vigilant in scouting for Aspergillus ear rot and managing potentially contaminated grain.

The driest areas of a field should be targeted in scouting prior to harvest. Aspergillus rot most often appears as a powdery, olive-green mold toward the tip of the ear. If ear rot is detected in an insured crop, growers should contact their insurance agent before the crop is harvested, stored or delivered for sale to protect their ability to make a quality-loss claim. The insurance agent will collect samples from the crop and submit them to a federally approved facility for testing.

click image to zoom

Common symptoms of Aspergillus ear rot. Photo credit: Harry Duncan, North Carolina State University

Uninsured growers can also submit samples for testing independently to inform their decision-making and head-off potential rejection at the elevator. Grain testing positive for aflatoxin above the 20 ppb threshold, but below 301 ppb, may still be used for livestock feed according to the U.S. Food and Drug Administration guidelines shown in Table 1. Storage of affected grain is not recommended. However, if the crop must be stored, drying air temperatures should be above 120 degrees Fahrenheit and the grain dried more than normal to a final moisture level below 13 percent.

Table 1. Maximum aflatoxin concentrations allowed in various animal feeds.
Reproduced from Bradley et al, 2012.


Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left


Tower Blend System

The Layco Tower fertilizer handling option is designed for high capacity retail or wholesale use. The standard Tower features the ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form