Corn knocked down from high winds

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

October left with a blast. High winds across Kentucky blew in odd directions and over some corn fields. We knew this was going to be a risk this fall. The heavy ears, shallow roots and slow drydown all created a risk for downed corn. The high winds also brought rains, meaning that harvest will not resume for several days. What can we do now?

We can start by inspecting fields. Identify the fields where corn is down and fields where corn is standing. If corn is standing, check stalk strength with the grab test. (Grab the corn stalks at shoulder height, pull or push about 18 inches off center and release. If the corn stalks remain upright, stalk strength is good. If not, stalk strength is weaker.) Identify the grain moisture in all fields.


Knowing the percent of corn that is down and the grain moisture in each fields will help you decide which fields are ready to harvest and which fields need more time to dry down. Once these are known, you are left with the challenge of deciding when to harvest the downed corn and upright corn.   

Downed corn is at greater risk for not drying and for having other kernel problems. Downed corn may take three or four times longer to harvest than a field of upright corn. Harvest losses in downed corn may be 10 to 15% even when care is taken to harvest. Upright corn is faster and easier to harvest and has better potential for good seed quality. Upright corn, depending on stalk strength, is also at risk of becoming downed corn.

If the corn is all laying down in the same direction, some combines work best when harvesting from the opposite direction (i.e. harvesting with the tassel pointing at the cab). This means that harvest one direction, circle back to the other end of the field and harvest in the same direction again. Even if you could harvest at normal speed, harvest time is doubled.

If corn is laying in all directions, then reels may be an option. There are several reals on the market. Reels that have the ability to be adjusted from the cab might be more helpful, but matching the correct reel to your combine requires some conversations with the equipment manufacturers and other producers.

Finally, remember to be patient. Corn harvest is the most exciting time when corn is good. Corn harvest is the most frustrating time when something goes wrong. Downed corn delays harvest. But, harvesting as many of the downed ears as possible requires slow going and patience.


Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left


Vertical Floor Blenders

Waconia floor blenders provide a quality blend fast, year-after-year. Blenders are mounted on (4) load cells that provide accuracy ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form