Does applying fungicide to corn pay?

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

click image to zoom North Dakota State University has received a number of calls recently about the use of fungicides, post-tasseling on corn. Fungicide use in corn has been growing in importance in the USA. Fungicides can be an effective tool for controlling diseases, if genetic resistance is inadequate and when disease pressure is high.

In North Dakota it is difficult to find foliar diseases on corn. Therefore, fungicide use on corn has been more directed towards apparent plant health benefits whose physiological basis has been difficult to elucidate. When asked if fungicide should be used in corn, we usually respond by recommending a fungicide if it appears that foliar diseases will be problematic. Since diseases will not likely be limiting, the conversation then centers around the likelihood that a fungicide will provide a profitable yield response in the absence of disease.

From research conducted at Carrington and Prosper over the past few years we found that a fungicide (in these experiments Headline was used) a positive yield response of greater than 6 bu was obtained in 4 of 10 site years (see Figure 1). NDSU researchers used 6 bu as the point where the cost of the fungicide plus the cost of application might equal the value of the extra grain produced. In 4 of the 10 site years, however, the yield of the fungicide treated plots was less than or equal to that of the untreated plots. 

Researchers are continuing this work with fungicides, but the current data does not demonstrate a consistent or a compelling benefit for their use in our environmental conditions. In fact, current data suggest that there is about an equal chance of getting no response (or a negative response) as there is of making additional money with fungicides on corn and a 6 in 10 chance of not making a sufficient return to pay for the cost of the fungicide application.


Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (2) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left

Edgar Hammermeister    
Saskatoon  |  August, 12, 2013 at 08:26 PM

Consideration needs to be made for the long term efficacy of the fungicide. Overuse creates the risk of losing the tool. Hopefully the data provides enough evidence for the grower to keep this "gun" in its holster, waiting for a better target.

Anti-Edgar    
August, 19, 2013 at 11:23 AM

Edgar, why be affraid to use something if it works. In my territory the data shows that fungicide applications pay. My guns are out and I'm firing away! :)


Kinze 1500 Grain Cart

The Kinze 1500 Grain Cart is engineered for speed and reliability required of custom harvesters. Load up to 1500 bushels ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form