Corn ear rot potential in Ohio corn

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

It is already the first week of October and most of the corn is still not ready for harvest. Some of the earlier-planted fields are being harvested, but at relatively high moisture levels. This is causing some concern among producers as to the potential for ear rot and mycotoxin problems. We have received reports of ear rots in some fields and, understandably, after the vomitoxin problems we had in 2009, producers are asking whether we are likely to see a similar problem again this year. So far the problem does not seem to be widespread, with only a few fields affected, and not every ear rot is associated with vomitoxin contamination of grain. In particular, most of the reports indicate that the affected fields have Diplodia ear rot, which does not result in vomitoxin contamination. However, ear rots could potentially become more of a problem if it continues to rain and the corn remains in the field for an extended period.   

One of the very first steps to determining whether you will have a problem with vomitoxin or other mycotoxins is to know which ear rot you have in your field. Generally, it is fairly easy to tell ear rots apart based on the color of the fungal growth on the ear, where the moldy kernels are located, and how they are distributed on the ear. Other good indicators are the prevailing weather conditions and susceptibility of the hybrids. For the two most common ear rots in Ohio, Gibberella and Diplodia, both of these diseases develop best when wet weather conditions occur during the first few weeks after silking, with Gibberella being favored by slightly cooler temperatures than Diplodia. Unlike 2009 when conditions were cool and rainy during the weeks after silking, conditions were relatively warm and dry this year. For both diseases, spores of the fungus are splashed onto the silk where they penetrate and grow into the ear. However, infection may also occur at the base of the ear, especially if it rains late in the season and the ears remain in an upright position, collecting water at the base between the husks and the kernels.        

Diplodia causes a thick grayish-white mass of mold to grow on the ear, usually beginning from the base and growing toward the tip. With Gibberella, a visible white to pink mold usually covering the tip or more of the ears is characteristic of this disease. The Gibberella ear rot fungus produces mycotoxins that are harmful to animals. These include deoxynivalenol (Vomitoxin) and zearalenone and T-2 toxin, all of which may cause health problems in livestock. Therefore, suspect grain should be tested for these mycotoxins by chemical analysis before being fed to animals. As a general rule do not feed any grain with 5% or more Gibberella moldy kernels. Hogs and young animals are particularly sensitive to these mycotoxins. Diplodia ear rot is less of a concern from a mycotoxin standpoint. There have been no reports of Diplodia producing mycotoxins that are harmful to animals in Ohio, but animals do refuse to eat grain with high levels of Diplodia-damaged kernels. Additionally, severely affected grain has low nutritional value.

Certain hybrids are more susceptible to one or more ear rots than others. Examine ears to determine the presence of ear molds. Make a note of which ear rots are present and hybrids that are most affected. Make future hybrid choices based on this information. Growers are advised to follow certain harvest and storage guidelines to minimize problems associated with kernel rots and mycotoxin contamination:

1. Harvest at the correct moisture and adjust harvest equipment to minimize damage to kernels. Mold and mycotoxins tend to be higher in (machine or insect) damaged kernels.

2. Dry harvested grain to 15% moisture and below to prevent further mold development in storage.

3. Store dried grain at cool temperatures (36-44F) in clean, dry bins. Moderate to high temperatures are favorable for fungal growth and toxin production.

4. Periodically check grain for mold, insects, and temperature.

5. If mold is found, send a grain sample for a mycotoxin analysis to determine if toxins are present and at what level. For more on moldy grain, mycotoxins, and mycotoxins sampling and analysis visit the following websites:

Prev 1 2 Next All

Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...

Comments (0) Leave a comment 

e-Mail (required)


characters left

LPV Seed Treater

The LPV Seed Treater has set a new standard boasting three configurable weighing methods for any-sized operation, a standard 42” ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form