Aspergillus ear rot and aflatoxin production

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

Not surprisingly, the hot dry conditions we have been experiencing across the Corn Belt have many farmers and the grain industry concerned about aflatoxin, a potent mycotoxin that is produced by the fungal pathogen, Aspergillus flavus, which causes Aspergillus ear rot.

This article will briefly summarize the biology of Aspergillus ear rot, aflatoxin production and management recommendations for the next few weeks of this growing season.

Figure 1. Characteristic signs of Aspergillus ear rot. How do I recognize Aspergillus ear rot?

Aspergillus ear rot is an olive-green powdery mold  (Figure 1), not to be confused with Penecillium ear rot, a powdery denim-blue mold. Higher aflatoxin levels are associated with discolored, shriveled kernels that are often found near the tip of the ear.

What conditions favor infection of corn by A. flavus?

Infection of corn by A. flavus and consequent disease development is favored by hot (>86F) dry conditions at pollination and during grain fill. Yellow brown silks are most susceptible to infection. Spores landing on the silks germinate, rapidly grow down the silk and colonize the surface of the developing kernels. Around physiological maturity, when moisture content (MC) drops to around 32 percent, the fungus starts to colonize the internal tissues of the kernels, and it continues to grow until MC is around 15 percent.

What conditions favor aflatoxin production?

Aflatoxin is a secondary metabolite that is produced by A. flavus under certain conditions. Drought and high temperatures (80 to 105F) during grain fill are the most common factors associated with pre-harvest aflatoxin production. Warm nights (>70F) may can also increase risk of aflatoxin contamination.

Toxin production depends on kernel moisture and temperature. As kernel moisture decreases, aflatoxin production increases. Toxin production is highest at 20 to 18 percent kernel moisture and stops at around 15 percent moisture. Aflatoxin production occurs between 52 and 104F with the optimum temperature range being 77 to 95F.

Can I determine if my corn is at risk for aflatoxin?

Because aflatoxins are associated with Aspergillus ear rot, farmers can scout for the ear rot. From dent through to harvest, several (five to 10) locations in a field should be assessed. Target areas of the field with plants that appear most stressed. At each location, peel back the husks of 10 ears and inspect them for olive-green powdery mold (Figure 1) that is characteristic of the ear rot. If greater than 10 percent of the ears show signs of Aspergillus ear rot, schedule the field for an early harvest.  

Harvesting fields with Aspergillus ear rot

Notify your insurance adjuster immediately if you have fields with Aspergillus ear rot. Infested fields need to be inspected before harvest or strips left in the field for a claim to be made.

Harvest grain at approximately 20 to 25 percent moisture. Adjust combine settings to ensure minimal damage to the grain. Damaged grain is at risk to infection by A. flavus in storage. 

Cool and dry grain to 16 percent moisture or less immediately. One study showed that if corn grain at 21 percent MC was put in bin at 86F and cooled with air immediately, little fungal growth was detected and no aflatoxin was produced. If cooling was delayed 20 to 40 h, the fungus grew and aflatoxin was detected. 


Thanks to Tom Isakeit at Texas A & M for reviewing an earlier draft of this article and sharing his experiences with aflatoxin.

Prev 1 2 Next All

Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...

Comments (0) Leave a comment 

e-Mail (required)


characters left


Made of high quality 304 stainless steel, the Quickveyor is one of the strongest trailers on the market. It’s belt ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form