Legume seed inoculation

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

Legume inoculation is the process of introducing commercially prepared sources of rhizobia to promote nitrogen fixation. This usually is done by applying inoculum directly to the seed prior to planting, or by metering the inoculum into the seed furrow during planting.

If the legume crop was grown in the field previously, there is a good chance that the soil already contains the correct rhizobial species for nodulation. However, native rhizobial populations found in soil often are less effective in nitrogen fixation potential. A nodule that is actively fixing nitrogen will be pink to reddish when cut open, rather than tan (ineffective) or green (dying).

Commercial inoculants are composed of rhizobial strains selected for maximum fixation potential. However, even when more efficient strains are introduced into the soil, there is no guarantee these strains will compete well with native strains for entry into plant roots.

Many studies have been conducted on the application of commercial inoculants into soils that already contain the correct rhizobial bacteria. In some studies, a significant yield increase has been observed. In other studies, no response occurred. Acid soils often have poor survival of the rhizobia. One way to evaluate the response of inoculants is to test several inoculants and an untreated control in fields using replicated strip tests. When in doubt about the rhizobial population in a field, it is a good practice to apply inoculum, especially if the legume has never or not recently been grown in that field.

Maintain proper soil fertility to ensure nodulation and nitrogen fixation. Some legumes normally get most of their nitrogen from the atmosphere through symbiotic nitrogen fixation. Attempts to supplement the legume nitrogen supply by fertilization usually are counterproductive, because plants tend to stop nitrogen fixationwhen soil nitrogen is high. Phosphorous and potassium can affect nodulation and nitrogen fixation. Research shows that additions of phosphorous and/or potassium increase the number of nodules formed, fresh weight of nodules, and amount of nitrogen fixed per nodule.

An important micronutrient for nitrogen fixation is molybdenum. Soils with a pH below 6.0 usually have low molybdenum availability. Other soils that could be low in molybdenum include those that are strongly weathered or leached, sandy soils, or soils high in manganese and iron. If molybdenum is a limiting factor, apply it as a seed treatment with the inoculum. Some inoculants have molybdenum already incorporated. Read the package label.


Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left


Conveyor Equipment

Adams Fertilizer Equipment manufactures several styles and types of conveying equipment including: chain drag conveyors, bucket elevator legs, stationary and ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form