You have droughty corn: Now what?

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

When the National Agricultural Statistics Service (NASS) last Wednesday announced it was reducing its estimate of the national corn average yield by 20 bushels per acre and the soybean yield estimate by 4 bushels per acre due to the drought, the USDA made its first official acknowledgement of the plight of Corn Belt farmers whose crops have been impacted by heat and the lack of adequate moisture. That set in motion an announcement from Secretary of Agriculture Vilsack that several rules would be changed to ease restrictions on farmers needing assistance.

 

The USDA drought disaster package is designed to ease some of the regulations that will speed assistance to affected agricultural areas. Those include:

 

  1. A 40 percent reduction in processing time for most counties affected by disasters;
  2. A reduced interest rate for emergency loans that effectively lowers the current rate from 3.75 percent to 2.25 percent; and
  3. A payment reduction on Conservation Reserve Program (CRP) lands qualified for emergency haying and grazing in 2012, from 25 to 10 percent

 

Are you in one of the Drought Fast Track counties? Here is a map as of July 11. Any questions about those benefits or assistance with application filing should be directed to your local Farm Service Agency (FSA) office.

 

While the easing of those program regulations may help some farmers, the most widespread benefit may be crop insurance indemnities for reduced yields. Many farmers have already discussed the issue with insurance agents, but Midwest Regional Director Brian Frieden of the Risk Management Agency says farmers should notify agents within 72 hours of discovering the yield damage. His news release reflects all disasters, even though the drought began weeks ago, and the 72-hour notice is a formality of the rules. Frieden and others who have addressed themselves to the crop damage issue have frequently suggested the possibility of destroying a corn crop and planting soybeans or an alternate crop.

 

Consult with your crop insurance agent before harvesting or destroying any drought-damaged crops, says Iowa State University economist William Edwards, “If you elect to harvest it early, as silage, check strips can be left to verify the actual yield achieved. In any case, the acres must be released by the insurance company before the crop can be harvested early or destroyed.”

 

Be patient, Edwards says, “The agent will notify a certified crop adjustor to appraise the insured crops. Keep in mind that when damage is widespread, adjustors cannot be everywhere at once. The adjustor may declare the crop a complete loss. If it has significant yield potential, it can be left and harvested in the fall.” Any insurance indemnity payments will be settled based on actual harvested production over the entire insurance unit.” Iowa State provides a wealth of information about crop insurance.

 

How is a loss calculated? Edwards notes, “Fields declared a complete loss will be combined with any harvested acres in the same insurance unit to calculate the final yield. Yield losses are equal to the farm’s historical yield times the level of guarantee purchased, minus the actual yield.  Yield losses will be paid at a rate equal to the average CME futures price during the month of October, if it exceeds the average February price of $5.68 for corn (December contract) or $12.55 for soybeans (November contract), if you have Revenue Protection.”

 

If your corn is cut for silage, a second crop could be planted, but University of Missouri economist Ray Massey says work with your insurance agent, “If a second spring crop, such as beans are planted, it will affect the crop insurance on the corn harvested as silage. In such a situation, the farmer would receive 35% of the indemnity payment on the corn until the second insured crop is harvested. If there is no loss on the second crop, the remaining 65% of the corn indemnity will be paid. If there is a loss on the second crop, you will choose to receive the remaining 65% of the corn indemnity or the indemnity on the loss of the second crop.”

 

With tens of thousands of farmers seeking crop insurance claims on millions of acres, will crop insurance companies run out of money to pay claims? No, says crop insurance authority Ken Harrison. He says, “Each company holds an agreement with USDA that is unique in their reinsurance agreement because they ‘escrow’ the loss payments from USDA to each company.  So each company’s claim check is almost immediately ‘covered’ at the bank where the check is drawn by USDA.” Harrison says there is an extreme workload and that is an issue for management of crop insurance companies to resolve, but farmers should not worry about not getting a claim paid.

 

Summary:
USDA has approved a series of changes to its requirements that will allow a speedier processing of applications for benefits sought by farmers suffering crop losses from the drought. However, crop insurance will cover most of the USDA’s safety net support for agriculture. Farmers are being urged to work with crop insurance agents before destroying any initial crops to plant a second crop or harvest corn for silage, if it had been insured as a grain crop. Before any action is taken, check your insurance policy provisions.

Source: FarmGate blog


Prev 1 2 Next All



Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left


Speed King Honeycomb BeltVeyors

CrustBuster/SPEED KING Inc. has a full line up of Honeycomb style BeltVeyors that offer high capacity, greater discharge height with ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form