Windy start to 2014 brings wind chills; weather challenges

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

COLUMBIA, Mo. – January gave the windiest start of the year to Missouri in almost 30 years. Wind puts the chill in wind chill.

“Those who think winds are chillier than usual are right,” says Pat Guinan, state climatologist, University of Missouri Extension. The cold and wind continues into February.

Cold dominated the weather reports since Jan. 1. “Preliminary data for January indicates the statewide average temperature was 25 F. That’s almost 5 F below long-term normal,” Guinan says.

With the winds accompanying frequent fast-moving fronts, the wind chills regularly drop to minus 10-30 degrees.

A polar jet stream set up from northwest to southeast across the state. That let several Arctic cold fronts barrel through the region.

“Those fronts brought reinforcing shots of frigid air,” Guinan says.

The mark of cold weather is when the daily high temperature doesn’t rise above zero degrees. That happened often across northern and central Missouri. That hadn’t happened since December 1989, he adds.

Winds are driven by differential between high-pressure and low-pressure areas. The Arctic cold fronts bring lower air pressures with them. Then the following high-pressure zones behind the fronts rush to fill the lows. The gradient between the two determines wind velocity.

“The differential is like when you push the valve on an inflated tire,” Guinan says. “The energy gushes from high pressure to low pressure.” The colder the air, the higher the density and the greater the air pressure.

“This winter, the polar jet dipped more often and deeper into the United States than usual,” he says.

What’s unusual was that the cold fronts lacked moisture this winter, Guinan says. They delivered less than normal water despite deep snows in parts of southern and east-central Missouri. The snow in early February across the north was light and fluffy.

Moisture-laden Gulf of Mexico air has been blocked from encountering the cold fronts, which normally trigger precipitation. With few exceptions, the snow came from Pacific moisture brought in on the jet stream.

The cold winds and snow make hay feeding an almost daily challenge for farmers, says Rob Kallenbach, MU Extension forage specialist. Cold and wind increase nutritional demands for body maintenance.

Cows in spring-calving herds should be gaining body weight. That includes the developing calf, but also a deposit of body fat that will supply milk for the newborn calf.

Some farmers find they must feed twice the usual bales of hay. To maintain cows’ body condition, farmers are feeding supplemental grain rations.

For crop and forage farmers, an ominous sign is lack of soil moisture. The dry condition has been building since last summer. Snow did not mitigate that long-term trend toward dryness in most of northern and central Missouri, Guinan says.

The National Drought Monitor for January shows “abnormally dry” to “moderate drought’ across the northern half of Missouri.

Guinan, with the MU Extension Commercial Agriculture Program, maintains a system of automated weather stations across the state.

Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...

Comments (0) Leave a comment 

e-Mail (required)


characters left

Aluminum Grain Trailers

Maurer Manufacturing offers a complete line of high quality aluminum grain trailers. Manufactured in Spencer, Iowa, Maurer aluminum grain trailers ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form