What you need to know about GM crops and biotechnology

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

The Institute of Food Technologies just produced a video and fact sheet to share the science behind GMOs. You can view the video here, and the fact sheet is copied below. IFT has experts that can speak about this topic and are available upon request.

Genetically modified (GM) crops and foods and ingredients made available with the techniques of modern biotechnology have recently been dominating food and agriculture news coverage in the United States.  Food Technology magazine contributing editors Bruce Chassy, PhD, University of Illinois and Wayne Parrott, PhD, University of Georgia, and John Ruff, CFS, past IFT president dispel myths and clarify common consumer questions when it comes to GMOs.

Q: What are GMOs and GM crops?
A: GMO stands for genetically modified organism; and GM crops have been developed with the use of modern biotechnology. GM crops are varieties produced through introduction of pieces of DNA to give them specific desired traits (e.g., resistance to certain insects, herbicides, and viruses). Some more recently developed crop varieties (e.g., rice with increased beta–carotene levels and soybeans with more healthful fatty acid compositions) have traits of direct benefit for consumers.


Q: How long have crops been developed using the techniques of modern biotechnology?
A: The first GM crops were planted in 1994. Although it’s been just 20 years since crops have been developed through modern biotechnology, genetic modification has occurred for more than 10,000 years (Hancock, 2012). Farmers collected the seeds of edible wild plants and planted them in managed fields in early agriculture. Farmers took notice of the plants that were the most edible, produced higher yields, or tasted better and saved them to plant the following season. The resulting new crop varieties often did not resemble their original wild versions. Bread wheat and strawberries, for example, were only made possible through the techniques of modern biotechnology.


Q: What are some examples of crops and foods currently on the market that are from plants developed with modern biotechnology?
A: Soybean, canola, sugar beets, papaya, squash, and sweet corn. Ingredients such as oils and starches that are used in a number of food products may be made from soybean, canola, corn, and sugar beets.


Q: Does the U.S. Food and Drug Administration (FDA) and U.S. Department of Agriculture (USDA) review these crop varieties and food-related applications?
A: Yes. The FDA reviews new crop varieties developed via modern biotechnology, and the USDA reviews the new varieties prior to commercialization and marketing. In some instances (e.g., new varieties developed for insect resistance) the Environmental Protection Agency (EPA) also conducts a review.


Q: Are crops and foods made possible by modern biotechnology only in the United States?
A: No. Approximately 10 percent of the world’s agricultural fields are now planted with these new varieties of crops. In 2012 alone, more than 17 million farmers in about 30 countries planted new, modern biotechnology varieties of crops on over 420 million acres. The cumulative area planted during the past 17 years is equivalent to the size of the United States and Mexico.


Q: What are some positives attributed to these new varieties of crops?
A: Crops developed using modern biotechnology have increased yields through decreased losses to pests and viruses, less labor and other input costs, less agrichemical environmental impact, less impact on soil and water resources, and other environmental and sustainability gains. One of the major unanticipated benefits has been a reduction in greenhouse gas emissions from agriculture, equivalent to taking 22 million cars off the roads (Brookes and Barfoot, 2013).


With regard to foods and benefits of direct benefit to consumers, modern biotechnology is allowing improvement of color, flavor, nutritive value, and other traits. National and international expert panels around the globe have repeatedly concluded that it will be exceedingly difficult, if not impossible to meet the agriculture and food needs of future generations without the use of all available technologies including biotechnology (Solutions for Sustainable Agricultural and Food Systems, 2013).


Q: Why are these new varieties of crops and foods made from them labeled in the European Union but not in the United States?
A: In Europe, foods from crops developed with modern biotechnology techniques are labeled because a group of consumers insisted on the right to know. The FDA does not require labeling of foods from crops developed with modern biotechnology unless there is a compositional difference (high oleic acid vegetable oils) between them and their conventional counterpart.


Q: Are there food safety concerns regarding GMOs?
A: The Office of Science and Technology Policy asked the National Academy of Science to consider the safety of crops developed using the techniques of modern biotechnology and they responded by saying:

  1. Crops produced with modern biotechnology pose no novel risk
  2. Safety assessment should be focused on the characteristics  of the product rather than the process used to produce it
  3. No new laws were  needed to ensure safety or address environmental concerns since risks are “the same in kind” as those  of  conventional methods

Q: If the science is clear, why is there so much controversy?
A: Several websites proclaim harmful effects of consuming GM foods, pointing to a handful of studies to support their premise, and consistently ignoring the hundreds of studies to the contrary dismissing them as performed or paid for by industry, or performed by scientists sympathetic to industry. In addition, extreme claims about GM crops highlight the need to examine the expertise, objectivity, motives, and track record of the opponents making the anti-GM claims.


Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left


1325 Bushel Grain Cart

Equipped with a 22” computer balanced auger with 5/16” flighting,the unloading speed is 50% faster than smaller grain carts with ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form