What does different season soil testing show?

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

Crop consultants and ag retailer agronomy departments can take soil tests almost any time other than winter. Testing can be done in the spring, post-harvest and even during crop growth in the summer months. Each season has pros and cons for why sampling should or should not be performed. The important factor is that the sample results be interpreted appropriately, according to the time of year the samples are pulled, notes SGS laboratories.

SGS explains the difference in soil test results based on the season when the samples are pulled. In the Midwest, most fields are sampled and tested in the fall. Good weather and increased field activity spurs the fall sampling season.

Fall-applied fertilizer rates can be calculated from the latest possible soil test results, and the following winter months gives additional time for fall-applied lime to react in the soil before the following crop year. Some phosphorous/potassium (P/K) variability may occur, especially for K, due to uncontrolled events in the fall season such as weather, leaching and the rate of stalk decomposition.

Lowest K results are often seen when soil is sampled immediately after harvest in a dry season. Spring soil tests tend to be more consistent simply due to less volatile moisture extremes. Spring soil test values are usually within the variations seen in the fall, but some increases with spring sampling may be noted; pH may vary by 0.2 pH units, and K may increase by 40-100 pounds per acre.

P results do not fluctuate as much between seasons, but increased P results may be related to increased soil pH and organic matter in the spring season. Heavier soils (with higher CEC) are more apt for variation than the lighter, sandier soils (lower CEC). Spring sampling also gives a more accurate picture of what nutrients will be available to the plant for that crop year. It also relieves pressure in the more hectic fall season and allows time for planning fall fertilizer applications based off of spring soil test results.

Sampling during crop growth in the summer months may result in the lowest overall soil test results. As the crop grows it takes in nutrients from the soil, depleting the soil nutrient supply. The nutrients bound into the plant tissue are later returned to the field in the fall, winter and spring, while the nutrients bound into the crop yield is removed from the field. Lowest soil test results are usually noted in July through August, when the crop is fully grown and beginning to mature.

If soil tests are not current, testing any time of year is acceptable, although maintaining sampling season regularity does eliminate seasonal bias of results.

Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...

Comments (1) Leave a comment 

e-Mail (required)


characters left

Robert Milelr    
Colorado  |  June, 06, 2013 at 12:55 PM

A couple of points missed here... Fall soil soil K tests are often lower than spring, but id depends on when in the fall and how much precipitation. Later fall samples will generally be higher than those from early October. Soil pH is generally lower in the fall and higher in the spring, especially after a wet spring. As to in season testing.. samples taken pre V4 in corn and before 2nd trifoilate in soybeans are OK. Soil STK falls through pollination... soybeans STK values fall all season. Last comment spring sampling is more consistent than fall... If you can take spring oil samples or early summer as it will provide more consistent results.


Meridian’s conveyors deliver seed with unmatched versatility. Meridian’s transport conveyors are manufactured with heavy-duty, fully enclosed construction. Meridian’s cross cleated ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form