U.S. ethanol output slumps as losses spur plant closings

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

U.S. ethanol production has fallen to its lowest level since the government started collecting data more than two years ago, as  poor demand and the high cost of corn prompt a series of plant closings. 

Some signs are pointing to an improving market, but more closings could be coming without a reversal of the conditions currently hurting production and usage, some industry experts warned.

"Gasoline demand is down and that is the big driver," said R.J. O'Brien & Associates ethanol trader Julie Ward. "Withoutgasoline, you don't have anything to put ethanol in. We've hit a
blend wall."

Competition from imported South American ethanol is a factor as well, analysts said.

But one of the most critical pressure points for producers is the ongoing high cost of corn, said Neill McKinstray, president of the ethanol group for The Andersons Inc.

The Andersons, a top U.S. grain handler and owner and/or operator of ethanol plants with 330 million gallons of total capacity.

Corn has been hard to come by and is high priced after 2012 production dropped 13 percent to 10.8 billion bushels due to the devastating drought that gripped the U.S. Midwest. Some plants
have not been able to source enough affordable corn to continue to operate.

"Corn prices are a big factor," said McKinstray. "Until we produce a new and abundant crop of corn, we see challenges continuing. Unfortunately, with at least eight months to go before our next harvest, I think additional plant closures are likely."

Margins have been well into the red though recently have showed signs of strengthening and in some areas of the country are nearing break-even. But many producers have already been hit
hard financially.

"There has been a lot of cash burned at these plants in the last six months," Ward said.

Ethanol output fell to 770,000 barrels per day in the week ended Jan. 25, down 22,000 barrels from the previous week, the Energy Information Administration said. That compares to output of 939,000 bpd a year ago and 908,000 two years ago.

Meanwhile, stockpiles rose 2.3 percent to 20.54 million barrels in the most recent week.

The decline in production comes as plant closings and slowdowns have been accelerating. Of the 211 ethanol refineries in the country, 36 were idle as of Tuesday, according to the Renewable Fuels Association. That represents about 15 percent of the roughly 14.7 billion gallons of capacity, according to the trade organization.

On Tuesday privately held White Energy said a 120 million-gallon-capacity ethanol plant in Plainview, Texas, idle since Jan. 7, will remain closed through March and possibly until the last quarter of 2013 due to poor profit margins. Also this week, independent oil refiner Valero Energy Corp said it idled three of its 10 ethanol production facilities during the final three months of 2012. 

Last week, Abengoa Bioenergy said it would temporarily halt ethanol production at two plants in Nebraska because of the unfavorable market conditions. And POET, another U.S. ethanol producer, said last week that it would temporarily suspend operations at its Macon, Mo.,
plant.

There are some hopeful signs for ethanol producers. Imports  were down to 9,000 bpd in the latest reporting week from 67,000 bpd a week earlier. This decline comes as U.S. ethanol industry players complain about federal provisions aimed at boosting use of non-corn alternative fuels, which they say helps boost demand for Brazilian sugarcane-based ethanol. 

As well, blender demand bumped up about 1 pct, though still is well below the trend line and off track from a federal ethanol blending mandate of 13.8 billion gallons for 2013.

And, RIN values have been surging lately, up roughly 10-fold since last summer. RINs stands for Renewable Identification Number and correspond to gallons of renewable fuel to meet
blending mandates.

The advance in the thinly traded market for RINs primarily impacts the economics of the blenders and has yet to improve physical pricing much, said Linn Group analyst Jerrod Kitt.

But given overall market moves, Kitt said he believes output levels might be at a "seasonal bottom." 

"The market is attempting to stimulate more blending demand," Kitt said. "It's all about meeting the mandate, and at the moment, ethanol production is running far shy of what's
mandated for 2013."


Prev 1 2 Next All



Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left


Elevator Legs

Adams Fertilizer Equipment offers an increasing line of fertilizer handling equipment to meet the needs of today’s industry. Whether it ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form