The beginning of 2013 brings drought relief to Missouri

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

Last year’s high temperatures and long-term drought conditions left Missouri with a major soil-moisture and surface-water deficit. But as the adage goes, “Don’t like Missouri weather, just wait and it will change.”

At the beginning of the year there were worries that 2013 could be Missouri Drought – The Sequel. That might have been the case, but everything changed at the end of January.

“We saw a pattern change toward the end of January, with widespread precipitation that affected our state,” said Pat Guinan, climatologist for University of Missouri Extension. “That put a pretty good dent in the drought situation across our state.”

Even though many areas saw 1-2 inches rain, we still had a way to go in surface-water recovery. Then came February.

“We saw two major winter storms impact our state with a lot of snow; 15 to 20 inches of snow fell over most of northern and central sections, which was water in the bank,” Guinan said.

It wasn’t just snow. It was wet, heavy snow. While these snowstorms caused major headaches for motorists, road crews and people affected by extended power outages, that dark cloud had a very bright silver lining. It brought much-needed water. Generally, 10 inches of snow equals about an inch of water. Guinan took core samples of these two snow events to determine the amount of water and found about 3 inches of liquid water.

February’s snow also allowed many Missourians to experience a rare weather phenomenon: Thundersnow.

“Highly unusual to experience one thundersnow event, so for two to occur in a five-day period is something I’ve never seen before,” Guinan said. “We had the right dynamics. All the ingredients were in place for some heavy snow, and the instability associated with those storms led to thundersnow.”

Then there was another 1-1.5 inches of rain in early March, Guinan said. This continued to improve the soil-moisture levels and surface-water supplies in Missouri.

The timing of the precipitation also helped improve the soil-moisture deficit. Because these events occurred before the arrival of spring, there have been minimal evaporative rates.

“We’re in the winter season, so vegetation is still dormant, temperatures are not so high and day lengths are not as long as they are during the summer,” Guinan said. “So anything that has fallen has helped to recharge those moisture supplies, both above and below the ground.”

All this rain and snow has been a boon for much of the state, but not all of Missouri shared the bounty.

“When it comes to the drought situation, the southeastern third of the state has seen some significant improvement. But northwestern parts of Missouri have been missing out on some of these heavy precipitation events,” Guinan said. “Outside Missouri there still drought problems. West of Missouri things deteriorate quickly across the Plains from South Dakota to Texas.”  

Looking ahead, it appears that March will be a bit wetter and cooler than normal. This is certainly a different scenario from last year.

“March 2012 was a March that acted like the month of May. We saw record warmth in March of 2012,” Guinan said.

All this snow, rain, low temperatures and lack of evaporation means parts of Missouri are heading into the spring drought-free.

“At least according to the Drought Monitor map, about the southeastern two-thirds of the state is already drought-free,” Guinan said. “With more forecasted precipitation events on the horizon, we’re going to see even more improvement across the state.”

Weather resources on the Internet:

Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...

Related Articles

No matching related articles at this time.

Comments (0) Leave a comment 

e-Mail (required)


characters left

Declining Weigh Blending System

Ranco Declining Weigh (DW) is the standard in fertilizer blending because of the speed and accuracy of the blending process. ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form