Terminating cover crops

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

There is an increased interest in the use of cover crops due to the many agronomic and environmental benefits they offer. An important consideration when incorporating cover crops into the system is their termination. Failure to completely control cover crops at planting results in them acting as a weed and competing with the crop. Several factors influence the effectiveness of burndown treatments, including the cover crop species and growth stage, the herbicides and rates used, application parameters and environment.

Research in Missouri has shown that cereal rye and hairy vetch are usually consistently controlled with appropriate treatments, whereas winter wheat, annual ryegrass and red clover can be more difficult to kill.

As with controlling weeds, cover crops are easier to kill early in the spring while they are small. They become progressively more difficult to kill as they approach reproductive stages. The Roundup PowerMax label states better performance is achieved when applied before the boot stage of cereal rye. Increasing the herbicide rate and the spray volume to improve coverage will improve the consistency of control when dealing with large, mature cover crops.

Temperatures tend to fluctuate widely during the cover crop termination period and can lead to variable results. Spraying when temperatures favor active plant growth minimizes problems; however, abnormally cold nights (<40° F) may reduce activity even when favorable temperatures (>60° F) occur during the day.

Glyphosate is the standard herbicide used for terminating cover crops. Glyphosate is recommended at 0.63 lb a.e./A (18 oz Roundup PowerMax) for cereal rye 16 inches or less in height, and at higher rates for larger rye. Tank-mixing other herbicides with glyphosate may reduce the activity of glyphosate. Control of cereal rye with glyphosate was reduced up to 50% when tank-mixed with atrazine or Canopy, whereas 2,4-D, dicamba or Sharpen had little or no effect on rye control (K. Bradley, Univ. Missouri). The antagonism observed with tank-mixes was greater with late applications than applications made to small rye.

Unfortunately, we have a limited ability to access the susceptibility of cover crops to burndown treatments. The most consistent control will be achieved with applications made in early spring while cover crops are small and actively growing. Avoid spraying in the early morning or evening during periods with less than optimum temperatures. The glyphosate label provides great flexibility in application rate. While the Roundup PowerMax label states an 18 oz rate for cereal rye, this rate should only be used under ideal conditions. Increase the rate when tank-mixing with other products, with larger rye, or when applications are made during cool periods.


Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left


Kinze 1500 Grain Cart

The Kinze 1500 Grain Cart is engineered for speed and reliability required of custom harvesters. Load up to 1500 bushels ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form