Survey reports fewer winter honey bee losses

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

Total losses of managed honey bee colonies from all causes were 23.2 percent nationwide for the 2013-2014 winter, according to the annual survey conducted by the Bee Informed Partnership and the U.S. Department of Agriculture (USDA).

This represents a noticeable drop in mortality compared to the 30.5 percent loss reported for the winter of 2012-2013 and compared to an eight-year average of winter losses of 29.6 percent. Previous surveys found total colony losses of 21.9 percent in 2011-2012, 30 percent in 2010-2011, 33.8 percent in 2009-2010, about 29 percent in 2008-2009, about 36 percent in 2007-2008, and about 32 percent in 2006-2007.

Losses remain above the level that beekeepers consider economically sustainable. This year, almost two-thirds of the beekeepers responding to the survey reported losses greater than the 18.9 percent level that beekeepers say is acceptable.

The winter losses survey covers the period from October 2013 through April 2014.

"Yearly fluctuations in the rate of losses like these only demonstrate how complicated the whole issue of honey bee heath has become, with factors such as viruses and other pathogens, parasites like varroa mites, problems of nutrition from lack of diversity in pollen sources, and even sublethal effects of pesticides combining to weaken and kill bee colonies," said Jeff Pettis, co-author of the survey and research leader of the Agricultural Research Service (ARS) Bee Research Laboratory in Beltsville, Maryland. ARS is USDA's chief intramural scientific research agency.

There currently is no way to tell why the bees did better this year, according to both Pettis and Dennis vanEngelsdorp, a University of Maryland assistant professor who is the leader of the survey and director of the Bee Informed Partnership.

Among the leading causes of colony losses self-reported by beekeepers in past annual surveys are queen failure, poor wintering conditions, and damage by varroa mites. There is growing consensus among researchers that one of the largest contributors to poor colony health and colony losses is the varroa mite, an Asian bee parasite first found in the United States in 1987.

"What is clear from all of our efforts is that varroa is a persistent and often unexpected problem," said vanEngelsdorp. "Every beekeeper needs to have an aggressive varroa management plan in place. Without one, they should not be surprised if they suffer large losses every other year or so. Unfortunately, many small-scale beekeepers are not treating and are losing many colonies. Even beekeepers who do treat for mites often don't treat frequently enough or at the right time. If all beekeepers were to aggressively control mites, we would have many fewer losses."

ARS and other USDA agencies, university programs like the University of Maryland and the Bee Informed Partnership are working hard to develop best management practices to help beekeepers in the short term and are carrying out research to solve critical problems for pollinators in the long term.

The survey results are based on information self-reported by beekeepers. About 7,200 beekeepers who managed 564,522 colonies in October 2013, representing 21.7 percent of the country's 2.6 million colonies, responded to the survey. In the survey of bee losses for the winter of 2012-2013, more than 6,000 beekeepers responded, representing 22 percent of the country's estimated 2.6 million colonies.

This survey was funded in part by a grant from USDA's National Institute of Food and Agriculture, which also provides significant funding for the Bee Informed Partnership.

A complete analysis of the survey data will be published later this year. The abstract of the analysis is at http://beeinformed.org/results-categories/winter-loss-2013-2014/.

More information about ARS honey bee health research and CCD can be found at www.ars.usda.gov/ccd.


Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left


Quickveyor

Made of high quality 304 stainless steel, the Quickveyor is one of the strongest trailers on the market. It’s belt ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form