Storage problems likely with bumper corn crop

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

Farmers should look now for storage options for 2014's bumper corn harvest.

University of Missouri Extension specialist Bill Wiebold said farmers may hold onto corn this year to sell it when prices increase. Corn is trading at about $3.60 a bushel, down from the record of more than $8.30 a bushel in 2012.

The most recent USDA Crop Report predicts Missouri corn harvest at 160 bushels per acre, the second highest yield on record. Production is expected to be up 22 percent, 24 bushels per acre, from 2013.

Growing conditions were favorable in the 18 states that produce 91 percent of the nation's corn. And some producers still have 2012 corn crop in bins, Wiebold said.

Richard Fordyce, Missouri agriculture department director, said Thursday at the State Fair that the state's Grain and Inspection and Warehousing Division is reaching out to farmers and commercial grain elevators to help. "It's got to go somewhere," he said.

Some corn in the Bootheel region of Missouri has already reached black layer stage of development and shelling may begin as early as next week, said Anthony Ohmes, MU Extension agronomy specialist in Cape Girardeau County.

Frank Wideman, MU Extension natural resources engineer, said Bootheel-area farmers are talking about alternative ways to store corn. "A lot of the farming community would like to hold onto grain in hopes that prices improve over the winter," Wideman said.

Some are modifying existing structures such as machine sheds or hay barns, he said. These structures are not intended for grain storage but producers are fortifying them with wood and adding moisture-proof liners.

Others are contracting with commercial grain elevators for storage. Some are considering plastic bag tubes, temporary plastic bag storage systems up to the length of a football field and 7-8 feet in diameter. They are meant to hold grain for one season, Wideman said.

He said silage has been stored in these tubes for several years. There are differences between corn and silage storage, however.

Silage and corn with high moisture content can be successfully stored in tubes for feeding to livestock.

Corn must be dried prior to storage if it is to be sold later. Corn storage in tubes has some risk including fermentation. Unlike silage that is packed tightly, corn can be damaged when animals and birds put holes in the tubes in an attempt to gain access to corn. This allows rain or snow to enter the tube and cause damage.

Drying means extra costs and tubes cost about 7-8 cents per bushel, similar to the cost of commercial storage. However, producers incur extra labor costs and corn is reduced in quality and quantity.

A vacuum-type conveyor can be used to suck it up and blow it into a grain truck. A tractor with a front-end loader also can be used to load corn into the grain truck. Labor costs increase and value decreases with either method.

Farmers stored 11.78 billion bushels of grain on farms in 2012, according to the latest data available from the USDA. That was up 20 percent from 2002.

Rail traffic and other transportation issues also are likely for producers and commercial grain handlers this year, Wiebold said.


Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left


Declining Weigh Blending System

Ranco Declining Weigh (DW) is the standard in fertilizer blending because of the speed and accuracy of the blending process. ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form