Start scouting western bean cutworm in late July

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

Corn growers should start scouting in late July for signs of western bean cutworm, a potentially yield-reducing pest, two Purdue Extension entomologists say.

First found in Indiana in 2006, western bean cutworms feed on corn, legumes and dry beans, such as kidney and black beans. Despite the name, they do not feed on soybeans.

The cutworms can be identified by the black rectangles that develop behind the head of the later instars. These are commonly found feeding within the ear in late summer.

Western bean cutworm populations are tracked and roughly estimated each year using pheromone traps placed throughout the state. The traps capture the grayish-white moths, which usually lay eggs on Indiana corn plants in July. Feeding damage can appear a few weeks later.

So far this year, moth captures in northern Indiana are lower than previous years, said John Obermeyer, Purdue Extension entomologist and Indiana trap coordinator. But the number of moth catches does not necessarily give entomologists an accurate number of larvae, and is generally used as a presence or absence tool to initiate scouting.

Larvae begin emergence after a period of warm weather, but extreme conditions, such as last year’s drought and excessive heat, are hard on western bean cutworm. With the cooler, wet Indiana spring this year, Purdue Extension entomologist Christian Krupke said the insects are likely delayed.

“We’ve had a cool spring, so we’d expect emergence a little later than last year,” he said. “It is likely that the hot, dry weather that we had last year was not good for them.”

In the early stages of development, western bean cutworms feed on pollen caught in leaf axils of corn plants (where the leaf meets the stem). This is when growers should apply insecticides to fields to prevent further damage. Once the cutworm is inside the husk of the corn plant and begins feeding on kernels, insecticides are no longer effective. When pollen is gone, kernel feeding will begin and continue until the first frost.

According to Krupke, western bean cutworms also are sometimes indirect pests because they can increase the risk of ear rot development in corn plants by feeding on corn kernels. Some ear rots produce toxins that can be fatal if consumed by livestock – especially swine.

“When you take your grain to the elevator, they will test for mycotoxins. If it is over the threshold for that particular toxin, they might reject the whole batch,” he said. “That’s why this insect is a concern, because it makes the fungal pathogen colonize the ear more fully, which in turn raises toxin levels.”

Some Bacillus thuringiensis, or Bt, corn hybrids are very effective in resisting western bean cutworm damage, but growers are urged to check the label of their particular hybrids. Scouting and insecticide sprays are effective as well, but must take place before larvae enter corn ears.

More information about western bean cutworm scouting can be found at here.


Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...

Related Articles

No matching related articles at this time.



Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left


Convyers

Meridian’s conveyors deliver seed with unmatched versatility. Meridian’s transport conveyors are manufactured with heavy-duty, fully enclosed construction. Meridian’s cross cleated ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form