Start actively managing for salinity

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

Salinity is rearing its ugly head this spring as a result of a relatively high water table from all the rain last fall, limited flushing of salts as a result of low snow cover/melting and high evaporation from fall tillage and lack of soil residue since most of it blew across fields this winter. A high water table brings the water that carries the salts closer to the surface, less snow cover means less flushing of salts in the spring and high evaporation drives a process called capillary action that moves the water from the water table up towards the surface. Additionally, with as much soil erosion as there was this winter, the soluble salts below the surface now have less soil to move up through to reach the rooting zone of crops. 

Tillage seems like a good option to make a salt-affected, “white” soil turn “black” again and get rid of the problem. But, this practice actually accelerates salt movement towards the surface by increasing evaporation while the water table remains constant. When we talk about actively managing salinity, we often say, “dry the soils down.” To do this, you need to reduce evaporation and lower the water table.

Two things I recommend you do this spring:

  1. Collect soil samples – you need to “get your number” so you have a starting point to develop a long-term management plan. Do this from a saline area that you are concerned about and also a productive area from your field. Keep the samples separate and send them off to a soil testing lab to be run for Electrical Conductivity (aka Soluble Salts). You cannot begin to effectively manage an area until you know what your salt levels are.  And having a comparison from a salt-affected area versus a highly productive area will help you understand what good and bad salt levels are.
  2. Avoid tilling saline areas – this is something you can do even without “getting your number”. Tilling increases evaporation and will bring more salts to the surface. Chances are good that nothing is growing in those saline areas anyways, so you can plant directly into them without the tillage. I have had conversations with a few producers who are doing this and it is working well for them.

 Do these two things in the short-term and then work on developing a long-term plan.


Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left


Direct Drive Rotary Blender

The Doyle 8, 10, 13, & 16 ton Direct Drive Rotary Blender’s are the industry’s fastest rotary blenders. These units ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form