Spotlight on economics: low-carbon corn

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

During the Bio Industry Summit held May 21 on the main campus of NDSU, Beth Calabotta of Monsanto provided an overview of challenges associated with supplying a growing and ever- wealthier global population with the food, fuel and other products it demands.

One point brought up by Calabotta is that increased agricultural productivity typically reduces the environmental footprint of a crop on a per-unit basis.

Corn is a good example. New technology and improved practices have resulted in average U.S. corn yields rising from 20 bushels per acre in 1930 to more than 150 bushels per acre today, which has outpaced the corresponding increased use of energy and resulting emissions.

As North Dakota's bioenergy and bioproducts economist, I spend a lot of time researching the environmental sustainability of products and how they relate to economic profits. The primary tool I use for this is a life cycle assessment (LCA), which is a standardized method to model systems and measure the amount of energy used and greenhouse gases (GHG) emitted. The modeling is very detailed and often provides insights that are not readily apparent.

For example, it's obvious that today's corn farmers use energy to power equipment. What might not be obvious is the energy embodied in nitrogen fertilizer or a 560-horsepower tractor. These and many other inputs usually are considered as part of an LCA.

The impacts of biotechnology on agriculture productivity and energy use have been especially significant beginning with the introduction of double-crossed hybrids in the 1930s and continuing to the genetic engineering of today. I'm currently working to shepherd a few new biofuels through the U.S. Environmental Protection Agency (EPA) approval process that requires quantifying their environmental footprint.

The EPA asks for expected annual yield increases for each biofuel feedstock. The agency is interested in the energy and resulting GHG emissions from producing a gallon of biofuel. As crop yields increase, holding other things constant, the energy used and GHG emitted per gallon of biofuel decrease. This change may support these fuels to qualify as renewable or advanced biofuels.

Of course, there is more to agricultural biotechnology than increasing yields. New traits might eliminate the use of a current pesticide, which takes energy to produce and apply. At the same time, commercialized nitrogen use efficiency technology might significantly reduce fertilizer applications.

Although the issue of energy efficiency may not be at the top of all farmers' minds, the issue is important. In addition to new fuels qualifying as renewable or advanced biofuels with the EPA, biofuel refiners who market their fuels into areas with low carbon fuel standards, such as California and British Columbia, may capitalize on their products' smaller environmental footprint.

 


Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left


Kinze 1500 Grain Cart

The Kinze 1500 Grain Cart is engineered for speed and reliability required of custom harvesters. Load up to 1500 bushels ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form