Safety school provided huge volume of day one info

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

BLOOMINGTON, ILL.—Richard Gearheard, president of Crop Production Services, provided the keynote opening presentation of the 2012 National Agronomic Environmental Health and Safety School at Bloomington, Ill., in the brand new Asmark Institute Agricenter on Tuesday.

Gearheard addressed what it takes to “build a safety culture.” He noted the need for the following: “access to professional advice, commitment from senior management, commitment from people at risk and knowing what good looks like.”

Access to professional advice requires taking advantage of third-party and in-house advice and resources—being open to what is improvement. Knowing what good looks like is learning from other operations or the best single operation from within a large operation such as Crop Production Services has.

Gearheard talked about CPS’s ownership in Agrium and the company’s total operations prior to focusing on the safety aspects that comes down throughout the entire Agrium company.

From Gearheard, the safety school program moved to providing insight into what has been happening in Washington, D.C.—including legislative and regulatory agency activities. Richard Gupton, vice president of legislative policy for the Agricultural Retailers Association; Sarah McLallen, executive director, CropLife Foundation of CropLife America; and Pam Guffain, vice-president, member services, The Fertilizer Institute, provided a wide assortment of information.

Gupton addressed the farm bill roadblock and the national financial crisis. McLallen talked about the “changing terms of the debate” surrounding pesticide registrations and the need for pesticides to bring in support from organizations that wouldn’t normally be seen as traditionally aligning with pesticide organizations. Guffain mainly focused on the ammonium nitrate security program (ANSP) and how 99 percent of improvised explosive devices are made from fertilizer products. She explained how the U.S. availability of nitrate fertilizers is being tied to the international discussion, which is making it harder to keep ammonium nitrate available for import to the U.S.

Greg Handke, chemical security inspector, U.S. Department of Homeland Security, followed with a detailed explanation of the current situation of the Chemical Facility Anti-Terrorism Standards (CFATS). One of his comments that struck home for the attendees was how the site security plan was probably too complicated and poorly written.

Next up was William DelBagno, chemical countermeasures unit of the U.S. Federal Bureau of Investigation (FBI), who explained the vision to “eliminate the acquisition and use of weapons of mass destruction (WMD) by all adversaries.” A big focus in the U.S. has to be on “explosive precursor chemicals,” or the type of chemicals that can be bought over the counter, whether it is nitrate fertilizers, pool water cleaner chemicals or hair salon chemicals.

Shawn Lambert, risk management coordinator with the Co-Alliance Co-op in Indiana, provided his company’s experience with a federal inspection from the federal Occupational Safety and Health Administration. He noted some of the problems that can occur if the inspector is given full access without the business shutting down during an inspection.

Brian Bothast, compliance assistance specialist with the OSHA office in Illinois, also talked about the “hot topics” that are the focus of inspections. He noted the six major hazards being focused on are falls, electrocution, engulfment in grain/fertilizer, auger entanglement, combustible dust explosions and struck by equipment. Of the top 10 most frequently cited OSHA violations in Region V, two related to hazard communications are in the top three—1) general improper machine guarding, 2) lack of program hazard communications, and 3) lack or proper hazard communications training.

The day was rounded out with an explanation of the Progressive Agriculture Safety Days program, a panel explanation/discussion of how states are dealing with the National Pollutant Discharge Ellimination System (NPDES), and the Powerpoint presentation that goes along with the Purdue University printed “The ABC’s of Trailers and Hitches” was presented by its author Fred Whitford.

Whitford, Ph.D., coordinator of the Purdue Pesticide Programs, showed his ability to wake up any tired crowd at the end of a long day of meetings. He provided a large volume of comedy about serious topics whenever he takes the microphone.  


Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left


Blend and Bulk Tower Systems

Waconia Towers provide speed, efficiency and reliability that only gravity-fed systems can offer. Towers are available with up to 300 ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form