Row width in corn grain production

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article


The vast majority of corn acres in the U.S. and Canada are currently planted in 30-inch rows (85 percent), with narrow row spacing (less than 30-inches) used on fewer than 5 percent of corn acres. Regional adoption of narrow rows varies widely, with the highest adoption rate in the northern Corn Belt states of Minnesota, Wisconsin, North Dakota and South Dakota.
 
Mark Jeschke, DuPont Pioneer agronomy research manager, indicates the primary rationale for narrow row spacings in corn is that by reducing the crowding of plants within a row, the crop will be able to better utilize available light, water, and nutrients by reducing competition among individual plants.
 
Over the years, research on narrow row corn has produced variable results, which suggests that multiple factors likely influence corn yield response to row spacing. Yield benefits with narrow row corn have been observed more frequently in the northern portion of the Corn Belt. Even among northern locations, however, yield benefits to narrow rows were inconsistent.
 
For example, a university study during 2009 and 2010 found no yield advantage to narrow rows at two southern Minnesota locations. While a survey of several recent university corn row studies comparing narrow rows to 30-inch rows, found an average yield advantage of 2.8 percent with narrow or twin rows was observed in northern studies, compared to no advantage on average (-0.2 percent) for narrow rows in Iowa, Indiana and Nebraska.
 
Similar results have been observed in DuPont Pioneer research. Results from76 research studies conducted by Pioneer between 1991 and 2010 showed an average yield advantage of 2.7 percent with narrow or twin rows in the northern Corn Belt states compared to a 1 percent advantage across studies in the central Corn Belt.
 
The extensive history of research on corn row spacing has repeatedly shown that it is a very complex issue with many interacting factors. Yield results have often been inconsistent and highly variable across environments, making it difficult for growers to determine the best solution for their individual farms.
 
However, the accumulated body of DuPont Pioneer and university research conducted over the past 20 years does not indicate that the current standard 30-inch row spacing is limiting to corn productivity for most of the Corn Belt. This research also provides little evidence to suggest that narrow rows will consistently increase yield relative to 30-inch rows on productive soils under current agronomic practices.


Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...

Related Articles



Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left


Wireless Data Transfer

Enables wireless transmission of data between the GreenStar™ 3 2630 display, MyJohnDeere.com, and the producer’s farm management information system. This ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form