Rootworms show resistance to Midwest Bt corn

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

Isolated findings of resistant rootworms in Iowa emphasize that planting a refuge is more critical than ever for maintaining the durability of Bt corn, a Purdue Extension entomologist says.

Bt corn does not kill all larva that feed upon it, and very slight feeding damage from corn rootworm is typical, said Christian Krupke. But after researchers at Iowa State University were alerted to high levels of feeding damage in some fields, they began to test Bt corn hybrids that expressed the Cry3B1 toxin. They found that rootworms from those fields were able to survive exposure in the lab.

"This is not a cause for alarm for Indiana producers, and it was something that we suspected would occur eventually," Krupke said. "Producers should keep doing what they are doing for now as the vast majority of Bt continues to perform well for producers. This is more of a warning to be vigilant"

Currently, other Bt toxins appear to be effective against the pest.

He said growers in areas with histories of high rootworm pressure should scout fields in early to mid-July to look for lodged corn and adults, which are gold and black beetles. Farmers seeing anything unusual should dig up the plants and look for root damage. By August or later, roots can regrow and disguise damage.

If farmers see widespread damage, they should contact their seed representatives to determine if their corn was supposed to be protected by the Bt technology.

"Producers should only be more concerned if there is considerably more damage than usual," Krupke said. "Also, it's worth a second look to ensure they aren't looking at refuge plants instead of the hybrid."

Growers who think they have a potential problem should report it to their Purdue Extension county educators. All farmers should follow best management practices when using any hybrid varieties targeting pests.

The most important thing corn growers can do this season and in the future is follow refuge guidelines, Krupke said. Refuges develop a population of susceptible adults and allow mating between those and any potentially resistant beetles that emerge from Bt plants. Compliance with refuge recommendations has declined in recent years.

"The refuge is crucial as the Bt hybrids do not kill all larva; some will inevitably become adults. We don’t want those survivors to mate with one another and pass on the traits that helped them survive," Krupke said. "By limiting the number of mating adults we have, we can hopefully dilute the genetics of these resistant individuals and prevent the population from becoming resistant."

Rotating with soybeans, and diversity in cropping systems in general can also delay resistance. Fields with continuous Bt corn and high rootworm pressure should be closely monitored, as they provide the greatest pressure for resistance development.

For more information and a link to the Iowa State article, read the Aug. 5 issue of Purdue Pest and Crop Newsletter at http://extension.entm.purdue.edu/pestcrop/


Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left


Declining Weigh Blending System

Ranco Declining Weigh (DW) is the standard in fertilizer blending because of the speed and accuracy of the blending process. ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form