Request to stop changes to trucking hours of service

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

The hours-of-service (HOS) regulations for commercial drivers are “arguably the single-most important regulation to the motor carrier industry,” according to the Commercial Vehicle Safety Alliance (CVSA) and its Executive Director Stephen Keppler.

The alliance is upset that the Federal Motor Carrier Safety Administration (FMCSA) is changing regulations related to HOS again less than a year after changes being fully implemented.

Confusion about HOS whether it be for agricultural products transport or livestock carriers or non-agriculture products seem to be confusing to everyone including the enforcement officers, the transportation companies and the drivers.

“Legislating changes to the HOS rules now, not even a year since becoming effective, creates significant uniformity and consistency problems across the country. The results of this legislative action will create unnecessary upheaval for the states and cause significant operational and budgetary impacts on their enforcement efforts.

“In addition, constant change causes confusion for both industry and enforcement. Compliance and the determination thereof are nearly impossible because the rules have changed so often over the last 10 years, and have become so complicated that no one can keep pace with the changes. This constant back and forth also has resulted in a number of narrow interpretations on exceptions and exemptions.

“Finally, the hours-of-service regulations have continuously been litigated over the course of the last number of years, which also has complicated the process for having an effective set of rules,” Keppler noted in a recent letter.

“While there certainly have been legitimate concerns raised by the regulated industry on the impacts of the new rules, the Administrative Procedures Act is there for a reason and it needs to be followed. The importance of these rules cannot be understated, and to make changes without the appropriate analysis of their impacts or without providing appropriate due process and adequate time to implement them is irresponsible policy” Keppler went on to contend.

CVSA is calling for a comprehensive study on the safety and operational impacts of HOS regulations while the current 2013 rules remain in place. Keppler said, “Once this analysis has been completed, only then would it be appropriate to consider any changes or adjustments through the rulemaking process.”


Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left


Ports and River Receiving Systems

Material handling equipment for deep-water seaports and river terminals requires special design and construction to optimize speed, reliability and ensure ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form