RFA asks EPA to reconsider 2014 RFS blending levels

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article


The Renewable Fuels Association (RFA) submitted comments to the Environmental Protection Agency (EPA) urging the Agency to reverse its proposal to lower the 2014 Renewable Fuel Standard (RFS) Renewable Volume Obligations (RVOs). EPA has proposed to reduce the RFS from the statutory volume of 18.15 billion gallons (BG) to just 15.21 BG. As part of the cut, EPA is proposing to lower the requirement for renewable fuel (the portion of the RFS for which corn starch ethanol qualifies) from 14.4 BG to 13.01 BG.

In the detailed comments submitted to EPA Administrator Gina McCarthy, RFA President and CEO Bob Dinneen expressed that “RFA is strongly opposed to the proposal to reduce the 2014 RVO for renewable fuel from the statutory level of 14.4 billion gallons to 13.01 billion gallons. We encourage EPA to reconsider its proposal and finalize the 2014 requirement for renewable fuel at 14.4 billion gallons—the level set by Congress.”

Dinneen addressed the impact of the EPA’s proposal on the Renewable Identification Number (RIN) program, explaining, “Had the Agency proposed keeping in place the RVO for renewable fuel at the statutory level of 14.4 billion gallons, the RFS program’s Renewable Identification Number (RIN) market mechanism would have continued to function exactly as intended to ensure that required volumes of renewable fuels are produced and consumed. But by proposing an RVO for renewable fuel that is below the ‘blend wall,’ the proposed rule completely eviscerates the RIN market. In this way, the most significant factor contributing to the so-called ‘blend wall’ in 2014 is EPA’s proposal itself. The baffling approach to establishing annual RVOs set forth by EPA results in a circuitous, self-fulfilling prophecy that ultimately defeats the purpose of the RFS.”

He continued, “Plainly, this is a backward approach to complying with the RFS that belies Congress’s intent. Restoring the efficacy of the RIN mechanism by setting the RVO at 14.4 billion gallons would break this vicious circle and ensure the goals of the RFS are met.”

Dinneen also addressed the EPA’s lack of legal authority to use the so-called “blend wall” as a determinant for setting the RVO for renewable fuel, noting, “The Clean Air Act does not permit the Agency to take into account ‘factors that affect consumption’ in determining whether to grant a general waiver based on an ‘inadequate domestic supply’ of renewable fuel. Instead, EPA may grant a waiver based on an ‘inadequate domestic supply’ of ‘renewable fuel’ only where it finds that the renewable fuel industry lacks the capability to produce the required volumes of renewable fuel, and where there are insufficient carryover RINs available for obligated parties to meet the statutory RVO. The Agency has not made that showing here.”

Dinneen concluded, “In the end, the RFS program was designed to force the oil industry to change the status quo—not to perpetuate it. The entire purpose of this program would be subverted if the oil industry is rewarded for its failure to take the steps necessary to ensure that it was capable of distributing, blending, and dispensing the renewable fuel volumes required under the statute.”

RFA’s comments can be found here.


Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (1) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left

Globecore Blending    
Ukraine  |  February, 03, 2014 at 12:32 AM

One of the main debates of today are environmental problems. The detrimental effect of modern heavy industry on the environment and resource consumption lead to one effect: depletion of resources. In the over-industrialized society, lack of fuel for machinery and vehicles is a point of crises. The currently known fuels (gasoline and diesel) become a breaker for many businesses. Environment emission reduction and increasing of production efficiency at minimal cost are important factors for manufacturing business owners. To make fuel of the required quality and class, blending systems for liquid components are used. GlobeCore’s offer are the USB blending systems for mixing of fuel blends. The system can mix up to six components and additives. www.globecoreblending.com


NORAC UC4.5™ & UC5™ Precision Spray Height Control

NORAC offers two Spray Height Control systems that can be installed on most sprayer models. UC5™ is an ISOBUS system ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form