Preplan for a quality soil test result

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

Soil testing is a very profitable practice to manage fertility input cost and promote environmental stewardship. A standard soil test measures two of our three macro nutrients (phosphorus and potassium) plus soil acidity which governs availability of nutrients and other soil functions. The primary goal is to measure the soil’s ability to provide the soluble nutrient needed for crop production. A secondary goal is to compare soil test results over time relative to crop response and fertilizer additions, or what is known as “adaptive management”. The key to accomplishing both goals is to take a quality soil sample that represents the field area being sampled.

Planning ahead and establishing standard sampling criteria are good first steps to taking a quality soil test that can track trends over time. Preplanning involves determining the field area that will be collected for the sample. There are a number of different methods on dividing up a landscape that can be effective. The overall goal is to have sample areas in the field that have similar crop yields, crop rotation histories, fertilizer application methods and sources of applied nutrient. Fields or field areas with a history of manure, banded fertilizer application or other unique characteristics require a different sampling strategy. Field areas represented by a single sample should be less than 25 acres.

The second focus area for a quality soil test is the sample collection process. First, a soil sample is not a single core but a composite of numerous cores collected over the field area. Where broadcast applications have occurred a composite sample of 10-15 cores is suggested. Where a history of banded application exist in a field or manure application, then increase the number of cores to 20-25. The samples are bulked, mixed thoroughly and then a subsample submitted to the lab.

The second critical collection item to define is the sample depth. Nutrients in the soil are naturally stratified with higher nutrient generally found on the surface due to residue breakdown and fertilizer placement then decreasing deeper in the soil profile. Each core taken should be taken to the same depth in the soil profile. Generally an 8 inch sample should be taken.

Finally, some other factors in sample collection should be included. Scrape the soil surface before taking a core so the sample core does not contain residue or live plant material. If manure has been applied wait at least 6 months before sampling, or if fertilizer is applied wait 2 months. To compare trends over years, the soil sampling should be done at approximately the same time of the year. Early spring or fall when crops are not actively growing are ideal times to sample.

The whole goal of soil sampling is to make a fertilizer recommendation for crop production. To provide the recommendation calibration studies are done with the soil test to measure crop response. For Ohio, the Tri-state fertilizer recommendations provide the calibration study history for recommendation development. For more information on the Tri-state Fertilizer recommendations or developing a soil sampling strategy are provided at http://agcrops.osu.edu/specialists/fertility/fertility-fact-sheets-and-bulletins.


Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left


Tube Series (TS) Conveyors

USC’s Tube Series Conveyors combine the gentleness of the signature Seed Series with the traditional stability of a tube-style conveyor, ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form