Potential for corn ear molds due to weather extremes

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

A growing season characterized by weather extremes, leading to crop stress during flowering and delayed maturity, has created favorable conditions for classic corn ear molds. DuPont Pioneer experts warn that the environment will become increasingly ideal for ear molds if the weather brings cooler temperatures and periodic rains as we head into harvest. In addition, drought stress and insect injury to the crop provide an avenue for fungi to enter, causing ear molds to establish and spread.

“The carryover of ear mold inoculum from last year’s drought environment is likely minimal; however, growers with a history of molds should carefully scout their fields,” says Bill Dolezal, DuPont Pioneer plant pathology research fellow. “While not significant, we have heard reports of ear molds in Indiana and Illinois, as well as Missouri and Tennessee, this year. Ear molds reduce yield potential, grain quality and feed value.”

While scouting, it is important to identify molds and determine if mycotoxins are present. If mold presence is greater than 10,000 cfu/gram and is of the Aspergillus, Fusarium, Gibberella or Penicillium strains, a mycotoxin screening should be completed. Many crop insurance policies require that you  contact your crop insurance agent as samples must be pulled from the field by a loss adjuster prior to the grain being placed in storage. The representative sample must be sent to university plant pathology labs for proper mycotoxin screening and identification.

If 10 percent or more of the ears in the field have a significant amount of mold present on greater than 25 percent of the ear, harvest as soon as possible. The best way to prevent further growth and toxin development is to harvest at or above 20 percent moisture and then dry the corn to 15 percent moisture or less.

When harvesting, be sure to adjust your combine to minimize kernel damage and remove the lightest kernels. Broken kernels often have a higher likelihood of toxin development.

Proper grain drying and storage are critical to minimize further proliferation of existing molds. Grain should be dried to less than 15 percent moisture and cooled below 50 degrees as quickly as possible following harvest. Prior to storage, clean grain to remove any infected kernels, cobs and fines.

If possible, store infected grain separately to avoid putting the entire bin at risk for contamination. Grain should be stored in cool temperatures, preferably around 30 degrees. To maintain condition, regularly monitor and check grain in storage for temperature, moisture and insects. After handling infected grain, thoroughly clean drying bins and equipment to avoid further contamination.

Looking ahead to next year, Pioneer experts provide several tips to manage and decrease the likelihood of corn ear molds. Consider planting regionally adapted hybrids, such as those in the Optimum AcreMax product line-up; which offers many hybrid choices with strong traits for above-ground insect protection to help reduce damaged kernels and fungal-spore entry points. Implementing a balanced fertility program, designed for optimum yields, is also beneficial. Crop rotation and residue management can provide substantial disease control as well.

For additional management tips, contact your local DuPont Pioneer agronomist or Pioneer sales professional, or visit pioneer.com.


Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left


Declining Weigh Blending System

Ranco Declining Weigh (DW) is the standard in fertilizer blending because of the speed and accuracy of the blending process. ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form