Odds of yield loss increase the longer corn sits in fields

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

COLUMBUS, Ohio - While some growers may choose to let corn dry in the field, the longer the corn sits, the greater potential it has for yield loss, according to a field crop expert with Ohio State University's College of Food, Agricultural, and Environmental Sciences.

In fact, delaying harvest beyond early to mid- November can result in yield losses from stalk lodging, ear drop and ear rot, said Peter Thomison, Ohio State University Extension agronomist. OSU Extension is the outreach arm of the college.

Letting corn dry in the field exposes the crop to unfavorable weather conditions as well as to wildlife damage, he said. Although delaying harvest has little to no effect on grain quality traits such as oil, protein, starch and kernel breakage, it may result in more moldy grain, Thomison said.

"The potential for bad things happening increases considerably as we delay harvest beyond Nov. 1," he said. "While unfavorable weather might have kept some growers out of their fields, they should harvest as soon as possible.

"If we get into a wet period, a lot of our corn can weather rapidly. The drying benefits we get from delays decrease considerably with very cool temperatures."

As of Oct. 27, 47 percent of Ohio corn had been harvested, compared to 62 percent that was harvested at the same time last year, according to the Ohio Agricultural Statistics Service. The five-year average for harvested corn during this period is 47 percent, the agency said.

Thomison said farmers likely haven't harvested their corn because of unfavorable field conditions or are waiting for the corn to dry down further.

But according to research he conducted evaluating the state of corn hybrids, the longer corn was left in the field, the more yield loss was experienced, with an average of 11 percent between mid-November and mid-December.

Thomison's study was conducted at three locations statewide over a three-year period. It looked at the effects of four plant populations, including 24,000, 30,000, 36,000, and 42,000 plants per acre, at three different harvest dates, including early to mid-October, November and December, on the agronomic performance of four hybrids in varying maturity and stalk quality.

The study found that:

* Nearly 90 percent of the yield loss associated with delayed corn harvest occurred when delays extended beyond mid-November.

* Grain moisture decreased nearly six percent between harvest dates in October and November. But delaying harvest after early to mid-November achieved almost no additional grain drying.

* The greatest increase in stalk rot incidence came between harvest dates in October and November. In contrast, stalk lodging increased the most after early to mid-November.

Some growers have experienced rain delays that have slowed their harvest, while others had planting delays earlier in the season, Thomison said.

"A crop with weak plant integrity is more vulnerable to yield losses from stalk lodging and ear drop when weathering conditions occur," he said. "The widespread root lodging that occurred as a result of wind storms in July is also contributing to plant integrity issues problem.

"We encourage growers to harvest now to lessen the impact of these weathering problems. A lot of people are letting corn dry in fields as long as it can, but we encourage people to harvest promptly because we typically don't see significant decreases in grain moisture after early to mid-November."


Prev 1 2 Next All



Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left


1325 Bushel Grain Cart

Equipped with a 22” computer balanced auger with 5/16” flighting,the unloading speed is 50% faster than smaller grain carts with ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form