NASA backs 3D food printer to feed growing population

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

With concerns about our ability to feed 12 billion people by the end of the century, one engineer is looking to replace conventional food with something produced by a 3D printer, and he’s getting a grant from NASA to create a prototype.

The $125,000 grant gives Anjan Contractor and his company, Systems & Materials Research Corporation, six months to create a prototype.

Contractor ultimately expects to see a 3D printer in every kitchen, replacing food with powder and oil cartridges loaded into a printer to create custom meals for an individual’s diet and nutritional needs.

The 3D printers could end food waste as Quartz reports cartridges would be shelf-stable for up to 30 years.

The immediate goal of the grant isn’t as far-reaching. NASA hopes the grant, under its Small Business Innovation Research program, will yield a product that will allow astronauts to print food during long space missions.

Video of Contractor’s chocolate printer, seen here, sets the foundation for his current concept, the “pizza printer.” The prototype will print the layers of a pizza, starting with the dough, and heat the food as it’s printed. Similar to other 3D printers, recipes can be shared as software with instructions telling the printer how much sugar, complex carbohydrate and protein to mix at each layer.

Contractor has competition in the “food of the future” category. A Missouri-based company is currently researching 3D bioprinters while a doctor in the Netherlands is testing the use of stem cells to grow your future meals.

Contractor says the current food system can’t meet a growing population’s needs and people must have an open mind.

“Eventually have to change our perception of what we see as food,” Contractor said.


Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (8) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left

Lawrence    
syracuse, NY  |  May, 24, 2013 at 06:15 AM

Is this a forerunner to the "food synthesizer" in "Star Trek"? Where meals are produced out of basis mateial. Could also be used to make other objects.

Gouda Lady    
Michigan  |  May, 24, 2013 at 06:29 AM

This is a good idea for places which have limited food supply; but don't look for it to replace real, healthy food. The nutrition from food that comes from your garden, from healthy, happy, grass-fed farm animals will NEVER be able to be reproduced by a machine.

Bea Elliott    
Florida  |  May, 24, 2013 at 09:52 AM

"Grass-fed farm animals" who have their throats slit are NOT "happy" by any stretch of anyone's imagination.

TX_Tumbleweed    
Texas  |  May, 24, 2013 at 10:49 PM

Y'all enjoy a thick, juicy ribeye on me, to celebrate this holiday weekend. EAT MORE BEEF!!!

Grahame    
Australia  |  May, 24, 2013 at 10:53 PM

Well what next printing babies ? Anybody who thinks this is an alternative to what we have eaten for most of history - a primal meat - vegetable based diet are trying to meddle with nature.3D printed food will require us to print some good 3D printed new body parts including the brain.We have more than enough resources to feed the population if we take on practices like Holistic management. Watch Allan Savory TED talk http://www.ted.com/talks/allan_savory_how_to_green_the_world_s_deserts_and_reverse_climate_chang e.html

Helen Loretz    
Reno, NV  |  May, 26, 2013 at 01:15 PM

Read "Solient Green" it may be next.

Rattlerjake    
Reality  |  May, 26, 2013 at 08:07 PM

You won't see me eating this s h i t!

outspokeninUtah    
UTAH USA  |  May, 27, 2013 at 02:45 PM

Since Agenda 21 only holds for 5 Billion people world wide, the need for MORE food ....is it really necessary - any liberal /progressive can answer.


Aluminum Grain Trailers

Maurer Manufacturing offers a complete line of high quality aluminum grain trailers. Manufactured in Spencer, Iowa, Maurer aluminum grain trailers ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form