Model may help growers mitigate costly droughts

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

A University of Florida-created model may help growers plant at optimal times and avoid crop-destroying drought, which can cost millions of dollars in a given year, according to one of the tool’s creators.

If growers know when their crops need the most water, they can plant accordingly, said Keith Ingram, an associate scientist in UF’s agricultural and biological engineering department, part of the Institute of Food and Agricultural Sciences.

Although forecasts indicate a drought’s likelihood, they aren’t perfect, Ingram said. But they can help a farmer decide whether to plant a crop earlier or later than usual so drought is less likely to occur when the crop is most sensitive to drought, Ingram said.

ARID, the Agricultural Reference Index for Drought, could help growers avert catastrophic losses such as those growers suffered in the nationwide 2012 heat wave and drought. The National Climatic Data Center estimated that year’s U.S. crop damage at $30 billion.

In a recent study, scientists used ARID to predict crop yields by quantifying water loss for cotton, soybeans, corn and peanuts on eight farms in Florida and Georgia. They looked at a combined 134 years of daily weather data from the farms and found ARID can reasonably predict the crops’ drought levels.

“This data helps producers and buyers plan their decisions, and it helps identify hot spots where food aid might be needed,” said Jim Jones, an adviser on the study led by former UF doctoral student PremWoli.

ARID could have wide uses, Woli said.

“ARID has potential to predict various responses by a crop that are water stress-related ─ such as grain yield, total biomass produced, pest and disease infestation and more ─ for any field crop that is sensitive to drought stress,” said Woli, one of the tool’s inventors.

Woli, now a research fellow at Washington State University, created ARID in 2010 with help from Ingram and Jones.

ARID takes data, including daily rainfall, temperature, sunlight, wind speed and humidity, and compares potential versus actual amounts of water that evaporates from plants into the atmosphere.

When roots cannot bring enough water up from the soil to replace evaporated water, plants experience stress, said Ingram.

Most drought indices can’t estimate crop growth or productivity loss because they’re not based on plant physiology, said Ingram, also director of the Southeast Climate Consortium. The consortium is a multidisciplinary group of scientists from eight universities in the Southeast who work to help growers and others manage climate risks.

Drought comes in various forms: Agricultural drought is characterized by insufficient water for maximum crop growth, and varies by the time of year. A winter drought may not affect crops as much as a summer drought, because plants need less water during the cool, short days of winter.

Ingram, Woli, Jones, director of the UF-based Florida Climate Institute and Gerrit Hoogenboom, an agrometeorology professor at Washington State, co-wrote the paper. It appears in this month’s issue of the Journal of Agronomy and Crop Science.


Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left


Aluminum Grain Trailers

Maurer Manufacturing offers a complete line of high quality aluminum grain trailers. Manufactured in Spencer, Iowa, Maurer aluminum grain trailers ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form