MU agronomist: Rains restore crop yield potential just in time

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

August rains, after a dry July, came just in time to fill corn ears and set soybean pods, says a University of Missouri agronomist.

“Timing of these rains could not be better,” says Bill Wiebold with MU Extension plant science. “These rains set the table for excellent possibilities.”

Rains fell, and continued, in a large midsection of Missouri starting Wednesday night, Aug. 6. Rains of 1 to 3 inches fell on cropland in an area from north of Highway 36, from Saint Joseph to Hannibal, and to I-44 from Joplin to St. Louis.

“Small areas received 4 to 5 inches of rain,” says Pat Guinan, MU Extension climatologist.

For the corn crop, about a third to half of corn yield has been stored in the kernels, Wiebold says. With rain, the amount of stored yield can increase to three-fourths in the next 10 to 12 days.

“Soybean plants had not begun to store much yield,” Wiebold says.

“This is a critical time for soybean pod set. You must have pods if you want yield, as pods provide a place to store yield.”

In dry weather, soybean plants flower, but shed pods in drought. “Most pod loss would occur in the next 10 days,” Wiebold says. “Rain helps pod set to increase yields.”

Corn growth was further along. “However, these rains keep corn yield engines humming,” Wiebold says.

With 64 percent of Missouri corn still in dough stage, kernel fill can continue.

A dry July, with some areas getting less than an inch of rain, threatened yields. Wiebold says that corn kernels were in place on the ears. However, without rain, kernels were not filling.

“We still need 3 to 4 inches of evenly spaced rain in August to push yield to record highs,” he adds. Rain and sunlight fuel photosynthesis, which creates yield.

Some corn yield may have been hurt by dry weather in July.

July moisture is most critical for corn yield potential. August rain is critical for the soybean crop.

Without rain, optimistic early estimates of crop yields could not have happened, Wiebold has warned. Corn yield depends first on kernel set on the corncob. That occurs at pollination, usually in early July.

After kernels are in place, July rains begin filling those embryonic kernels. Without water, yield cannot increase.

A wet June started what was being called the “best-looking corn crop ever.” Some farmers reported, “Every seed planted came up.” That brought higher than expected stalk populations.

Good growing condition created more vegetation than usual, Wiebold says. Early, the foliage that creates photosynthesis was a good omen. But when rains stopped in July, extra vegetation increased evaporation. Leaves were drawing scarce moisture out of the soil.

The second-coolest July on record helped cut water loss, Guinan says.

MU Extension agronomists were agreeing that crops had about reached their limits.

Thunderstorms forming in Kansas moved along a cool front across Missouri.

“Rains came when they were needed,” Wiebold says.

Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...

Comments (1) Leave a comment 

e-Mail (required)


characters left

Iowa  |  August, 13, 2014 at 08:25 AM

I am glad you have gotten rain but there are a few of us that have not had rain since July 1st we had a 1/2 of an inch . We are frying.

Kinze 1500 Grain Cart

The Kinze 1500 Grain Cart is engineered for speed and reliability required of custom harvesters. Load up to 1500 bushels ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form