Kudzu bugs emerging in Virginia

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

In mid-March 2014, more than 50 Virginia Cooperative Extension Agents and Virginia Tech faculty and staff began monitoring a 51-county network of sticky traps to determine overwintering emergence of kudzu bug in Virginia.

Trap operators were instructed to position the traps in any open area (e.g., open fields or lawns in urban or rural settings). The trap consisted of 4-inch diameter PVC pipe, 18-inch long, with an end cap on top, suspended approximately 6 inches above the ground using a support stake.

A 12-inch band of sticky paper (Stable Fly Sticky Sleeve, Great Lakes IPM) was fitted all the way around the PVC pipe.

Trap operators were instructed to check the trap two or three times per week for presence of kudzu bugs and to change sticky paper weekly. Data, including zeros, are being recorded until the date of first capture of kudzu bugs for each county. Visual reports of kudzu bugs by the trap operators are also accepted for first capture data.

To date, 14 trap operators in 13 counties have detected kudzu bugs.

Most reports have come from southeast Virginia. Some traps have caught one or two insects, while others have trapped many. Although it is premature to make any comments about trends, traps that are located adjacent to areas (kudzu patches, last year’s soybean fields) where kudzu bug numbesr were high last year are the traps that have caught insects. Also, generally, traps are catching insects on the warmest days.

Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...

Comments (0) Leave a comment 

e-Mail (required)


characters left

Kinze 1500 Grain Cart

The Kinze 1500 Grain Cart is engineered for speed and reliability required of custom harvesters. Load up to 1500 bushels ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form