How does hot, dry, windy weather affect corn plants now?

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

This time of year the growth rate of corn plants always amazes me. In all but replanted, and very late planted fields, we have already determined the number of kernel rows. (This usually occurs at about the 6- to 8-leaf stage). This year most areas had sufficient moisture, although in some parts of variable fields, you see corn plants “rolling” and looking gray in the afternoon. These stressed plants will likely produce ears with 12-14 rows, while the same hybrid with better moisture will produce 16-20 rows—a yield constraint by the time it is knee high.

Most fields are now at the 12- 16-leaf stage and 10 or so days to tassel emergence. The plants in these fields are in the process of determining number of kernels per row, and/or ear length. The more stress the plants feel, the fewer florets (potential seeds) will form lengthwise on the ear, resulting in fewer kernels. What happens to the developing florets now and until 10 days after pollination is absolutely critical to yield. Photosynthesis (sugar production) and making that sugar available to the florets of the ears at this stage will keep potential kernels from aborting. Drought stress will dramatically slow or even shut down photosynthesis. If you see severe leaf rolling, those leaves are not contributing to sugar production.

Estimating Soil Water Use and Irrigation Needs

A 60 mph view tells us that the plants are growing extremely rapidly—and that that rapid growth is using an amazing amount of water, if it is available. (Some areas of the state didn’t accumulate much subsoil moisture over the winter/spring.) You can see daily estimates of crop water use, including estimates for the previous three and future three days, at .

On extreme days, we are using 0.4 to 0.5 inches per day in many locations. While we seldom have many consecutive days of extreme water use, we may have three to four extreme days before temperatures and wind speeds decrease, bringing ET rates back to more normal levels.

Remember that as the plants grow above the ground, the root system is expanding below the soil. When corn is at the 16-leaf stage, we recommend using a rooting depth of 2.5 ft to schedule irrigations. At the silk stage, use a rooting depth of 3 ft and at the blister stage, use 3.5 ft. With varying stored soil moisture, varying growth stages, and varying ET rates across the state, it is imperative to monitor soil moisture to schedule your irrigations.

When figuring your well’s capacity, a good conversion factor to remember is that 450 gallons per minute applies 1 acre-inch of water every hour. If your well pumps 900 gpm, you are applying 2 acre-inches every hour. This equates to 144 acre-inches every three days. For a 133-acre pivot, you can apply about 1.1 inches of water every three days. Calculate your application capacity and keep in mind how much stored soil moisture you have when scheduling your next irrigation.

Looking for that Million Dollar Rain

On dryland acres in Nebraska, we are already seeing crop damage in areas that missed out on the big rains last week. Corn in these areas is showing reduced growth, both in height and leaf area. The worst spots are already turning brown and dying. Even if we get significant rain soon, we already have yield loss accumulating. If we see rains in these areas by tasseling, we can still get good silk emergence and yields. If not, yields will deteriorate rapidly.

I have seen “head high” corn make over 150 bushels per acre if rainfall occurs before pollen shed. I have seen total losses where it doesn’t.

The “drought tolerant” hybrids may prove their worth, and all the breeding and improvement in silking vigor and pollen-silk interval apparent in most corn hybrids (compared to those available 20 years ago) will be invaluable this year. No-till and minimum tillage techniques save a couple of inches of water, and may make the difference between a crop and no crop in these areas. (See G2000 Tillage and Crop Residue Affect Irrigation Requirements.)

In most areas of Nebraska it has been several years since we’ve had this level of stress. Moisture conservation practices, residue, crop rotation, weed control, and good long-term soil management may really pay off this year.

Source: Thomas Hoegemeyer, Professor of Practice, Department of Agronomy and Horticulture with Chuck Burr, Extension Educator in Phelps County and Gary Zoubek, Extension Educator in York County

Prev 1 2 Next All

Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...

Comments (0) Leave a comment 

e-Mail (required)


characters left

Portable Conveyors

Convey-all portable conveyors are designed to handle your crops gently and efficiently. We offer an extensive line of high capacity ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form