Field history influences the crop

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

The idea that the previous use of a field can influence how it performs in the present may seem simplistic to most people, especially those who have farmed most of their lives. There are, however, many factors that make this statement true, and quite a few of them may be new to even the most experienced farmers.

Reduced tillage and no-tillage farming practices can be used to increase profits, and in most cases yields too. These methods of producing crops have been especially important for the resumption of crop production in the Hill areas where I spend much of my time. Soil erosion can be essentially eliminated, and growers can farm in compliance with conservation guidelines. Many of the growers in this region who have either expanded or have resumed the growing of crops after many years have found that the history of each field is very important for success.

Before the field is considered for cropping, it should be evaluated for drainage issues. Many formerly farmed areas need to have their drainage systems brought up to workable levels since most channels have been clogged with debris. This work can get complicated since in some cases the classication may have changed. With this issue resolved we can move on to soil quality considerations.

The first thing that comes to mind when we think about the history of a field is soil fertility. Soil samples must be taken to determine the needs of the soil, and the laboratory recommendations should be followed as closely as possible. When there are major problems a grower may decide the expense will be too great, or that a long term program of improvement may have to be implemented.

A common problem in most of this area is soil pH, with most formerly idle fields needing lime. Phosphorus and potassium levels may be low, especially in fields where hay has been harvested without the addition of nutrients or lime, as is the case in many old fields. Poultry litter has been especially useful in bringing many of these “abused” fields back into production.

Another issue that has been difficult to deal with is shallow compaction in fields where cattle have been grazed, and especially those where cool season crops like ryegrass have been grown and grazed. The planting of summer crops into these fields can be difficult since no-till planters have problems penetrating the soil surface. Stand establishment is very difficult in some of these situations, and we may need a system such as strip till for planting these fields.

The future will require that we grow more food for the ever increasing world population. In order to do this we will need to farm more land and to produce higher yields from every acre. We can meet this challenge, but aggressive farmers will be required, and they will need to be supported by good information and open minded people who will help them rather than getting in their way.

Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...

Comments (0) Leave a comment 

e-Mail (required)


characters left

Pacesetter Grain Hopper

The Pacesetter Gain Hopper features original and innovative ideas like the patented RollerTrap™, the industry’s easiest to open and maintain trap ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form