Missouri corn crop takes another hit

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

The Missouri corn crop can’t get a break from the weather. Drought slowed growth most of the season. Now moisture from remnants of Hurricane Isaac delays harvest of that corn.

This may not be the year to let the crop dry in the field, says Bill Wiebold, University of Missouri Extension agronomist. Early harvest can pay, even it increases costs.

“Timely harvest is essential to harvest as much yield as possible, even if it means more drying and aeration costs,” Wiebold says.

Delays can lead to broken stalks and dropped ears from a drought-weakened crop. “Poor stalk quality leads to increased preharvest and harvest losses,” Wiebold adds.

In August, USDA estimated the Missouri corn yield at 75 bushels per acre. Wiebold, using a 30-year-yield trend line, calculated the 2012 Missouri corn yield should have made 141 bushels per acre. “That’s a yield drop of 47 percent,” he says. Harvest will verify actual yield.

“With that drop in production, farmers may be cautious to sink additional expenses into the crop,” Wiebold says.

“Harvesting a larger portion of the low yields may outweigh additional costs associated with early harvest,” he says. “Timely harvest as soon as fields are dry enough to withstand combine and wagon traffic is important to reduce harvest losses.”

There are many reasons stalk quality drops following a droughty growing season, Wiebold says. Some disease-causing fungi, such as charcoal rot, grow well in heat on drought-stressed cornstalks. Also, potassium builds stalk quality, but uptake was reduced on dry soils.

Stalk diameters of plants are smaller this year. The lateral expansion was limited by reduced turgor (water pressure) in the plant cells, Wiebold says. Many corn plants died early, allowing fungi to attack the dead cells and break down cellulose and other structural strengths.

The results can be cornstalk breakage below the ear. “It will be difficult to gather those ears into the combine,” Wiebold says.

While rains were needed, storms increase stalk breakage and delay harvest. Gulf air masses meeting a series of cold fronts bring more moisture while temperatures remain high.

High dew points result in fog and damp plant tissue. That stimulates growth of fungi, which further weakens cornstalks.

All the corn that can be harvested, stored and dried will likely be worth more than any prices seen before, Wiebold says. “The harvest should be worth the extra effort.”


Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left


Kinze 1500 Grain Cart

The Kinze 1500 Grain Cart is engineered for speed and reliability required of custom harvesters. Load up to 1500 bushels ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form