Farmer awareness of herbicide-resistant weeds

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

click image to zoom One of the key concerns about managing pests, and specifically weeds, is time requirements. This reflects not only agricultural demographics such as farm size, but also whether individuals have off-farm job responsibilities. The distribution of farm sizes represented in the survey responses approached a normal distribution (Table 1) and is representative of the farm size distribution in Iowa based on recent information from the National Agricultural Statistics Service.

When asked about whether they were aware of herbicide-resistant weeds on their farm, 70 percent indicated yes. This statistic is similar to information gathered in a project sponsored by the Iowa Soybean Association. The distribution of growers who responded positively about awareness of herbicide-resistant weeds was interesting in that the growers who farmed less than 250 acres were the least aware of this problem (Table 1). Similarly, they reported that they were less likely to change their management practices to address the evolution of herbicide-resistant weeds.

Farmers' willingness to modify weed management was generally directly related to their awareness of herbicide resistance; greater awareness of the problem resulted in adjustments to weed management. However, only 60 percent of the growers who farmed greater than 5,000 acres reported that they modified weed management programs despite a 70 percent awareness. This could mean that the larger growers had already modified the weed management programs or that they did not see the problem as a major threat.

The question that must be considered is how growers chose to modify their weed management programs. Comments by participating farmers indicated that the most common changes were inclusion of residual herbicides and use of multiple herbicide groups. Whether these adjustments address the complexity of the multiple herbicide resistances present in waterhemp remains to be seen. The fact that most of the changes are herbicide-based may not provide the necessary diversity of tactics needed to address the increasing issues of herbicide resistance in Iowa crop production.


Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left


LPV Seed Treater

The LPV Seed Treater has set a new standard boasting three configurable weighing methods for any-sized operation, a standard 42” ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form