Corn and soybean prices continue to retrace 2012 drought rally

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

Corn and soybean prices rallied sharply beginning in July 2012 as U.S. drought conditions unfolded. According to University of Illinois agricultural economist Darrel Good, it was generally expected that prices would follow the pattern experienced in other “short-crop” years, with prices peaking near harvest and returning to pre-drought levels later in the marketing year.  That pattern has generally unfolded with some differences between corn and soybeans and between old-crop and new-crop prices.

“For old-crop corn prices, July 2013 futures peaked at $8.24 on August 10, 2012, nearly $3.00 above the June 2012 low,” Good said. “That contract is currently trading near $6.50, well below the peak, but still above the pre-drought level. Due to an inverted price structure, spot-cash prices have been above July futures in much of the Corn Belt since January 2013, and that strong basis continues. 

“Prices remain generally high as it is not yet clear that the small crop of 2012 has been sufficiently rationed,” Good continued. “Exports remain weak, but ethanol production is rebounding from the low levels in the first half of the marketing year. Uncertainty still surrounds the magnitude of feed and residual use of corn. There is some expectation that the slow rate of use for the second quarter of the marketing year, implied by the March 1 stocks estimate, will be followed by a higher rate of use, implied by the June 1 stocks estimate to be released by USDA on June 28. That report will indicate whether sufficient rationing has been accomplished and will set the direction for old-crop prices,” he said.

For new-crop corn, prices have completed the transition back to pre-drought levels, Good said. December 2013 futures peaked at $6.64 on Sept.10, 2012, about $1.50 above the June 2012 low. That contract is currently trading just over $5.15, about $0.05 above the summer 2012 low.

“This past week of rapid corn planting progress has reduced some of the concern about acreage and yield prospects,” Good said. “A larger-than-average percentage of the 2013 crop will be planted later than is optimum for maximum yield potential, but there is growing confidence that the 2013 crop will be large enough to meet market requirements at much lower prices than experienced over the past year. However, the season for determining average yield and production is just beginning,” he said.

Good said that soybean prices have behaved similarly to corn prices but are still well above pre-drought levels. July 2013 futures peaked at $16.05 on Sept. 14, 2012, about $3.85 above the June 2012 low. That contract is currently trading near $14.60, still in the upper half of the trading range of the past year. Due to the ongoing futures price inversion, spot-cash prices in the Corn Belt have been above July futures all year, with basis levels strengthening in recent weeks. Old-crop prices are being supported by prospects of a minimum level of year-ending stocks and the need for consumption to remain under the pace of a year ago.

“For example, available supplies are expected to limit the domestic crush to 1.635 billion bushels, 4 percent less than the crush in the previous year,” Good said. Based on National Oilseed Processors Association (NOPA) crush estimates, crush during the first half of the year was 8 percent larger than the crush of a year earlier.

“Crush during the last half of the year then needs to be 16 percent less than that of last year,” Good said. “Crush in March was down only 2.5 percent, and the just released crush estimate for April was down about 9 percent from the crush in April 2012. A 22 percent year-over-year decline is needed during the last four months of the marketing year,” he said.

For new-crop soybeans, prices are closer to a complete transition back to pre-drought levels, Good said. November 2013 futures peaked at $14.10 on Sept. 14, 2012, $2.70 above the June 2012 low. That contract is currently trading near $12.25, $0.85 above the low of a year ago and $1.85 below the peak.

“New-crop price weakness reflects expectations of a large U.S. harvest this fall following the recent harvest of a very large crop in South America,” Good said. “Old-crop corn and soybean prices are expected to be supported until sufficient rationing has been confirmed.  If 2013 production levels reach current expectations, further weakness in new-crop prices would be expected. Of course, that is the question. What kind of summer weather will unfold?  For the old crop, current price premiums suggest a strategy of spacing additional sales over the next several weeks. For the new crop, production uncertainty along with prices well below the spring crop insurance prices suggests a strategy of modest sales for those with high levels of revenue insurance coverage,” Good said.


Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left


Tower Blend System

The Layco Tower fertilizer handling option is designed for high capacity retail or wholesale use. The standard Tower features the ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form