Concerns grow over damage to EU wheat crop quality

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

Europe is heading toward a large wheat harvest this year but concerns are mounting that much of it could only be fit to feed animals after heavy rain earlier this month.

 

Damage levels are unclear for now with farmers and analysts still assessing the state of crops as harvesting resumes in many countries, but there is little doubt there be will less wheat meeting milling standards than initially thought.

"In light of the good yields expected we can still hope to see a good milling wheat output but we are certainly heading toward a lower quality than average," Benoit Fayaud from analysts Strategie Grains said, adding it was too early to have a clear picture of the European crop's quality.

The quality issue mainly concerned western Europe, Romania and Bulgaria, he said.

The consultancy last week again raised its monthly estimate for soft wheat production in the European Union to 140.5 million tonnes, now 4 percent above last year's crop.

In France, the EU's largest wheat producer and exporter, operators said only 30 percent of the crop had been cut as of Wednesday after rain over the weekend delayed harvesting.

Field work was resuming around Paris and in eastern France with initial results showing some damage, mainly in the measurement of milling quality, known as Hagberg numbers.

Average Hagberg could fall as low as 140-160 seconds in France this year, against 99 percent of the crop meeting the key level of 220 seconds in 2013, traders said.

"What was still good milling wheat 15 days ago has just become feed wheat," a broker in eastern France said.

Premiums for higher-quality wheat have soared in French ports on fears that this year's harvest would be spoiled by poor quality.

In an opposite move, feed wheat has been sold at a discount as traders anticipate hefty supplies of low-quality wheat.

But some French traders were more cautious.

"We must wait. A maximum 30 percent of the crops have been harvested and on the Atlantic coast, results are good. For the north, we'll know more next week when the harvest will be more widespread," one trader said.

Picture Still Unclear

In Germany, the EU's second largest wheat producer, rain fell just as harvesting started, raising concerns of some loss of quality and that some of the crop had been flattened.

"However, the picture is still unclear and we do not know if damage has been suffered nor the possible extent," an analyst said. "Weather in the north and north east of the country has been much better and I do not think there will be any quality problems in north Germany."

About 15 percent of Germany's crop has been harvested. Forecasts are for showers in much of Germany including the north between Friday and Monday.

Germany's farm cooperatives association on July 7 pegged the 2014 wheat crop of all types would rise 1.8 percent on the year to 25.46 million tonnes.

In Britain, the wheat harvest has barely begun but the outlook is generally favorable with production expected to rebound after two consecutive poor crops.

"We've only really heard of one or two crops which have been harvested and we are not even at one percent at this stage," said analyst Susan Twining of crop consultants ADAS.

The International Grains Council has forecast a UK wheat crop of 15.5 million tonnes, up 30 percent from last season.


Prev 1 2 Next All



Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left


Quickveyor

Made of high quality 304 stainless steel, the Quickveyor is one of the strongest trailers on the market. It’s belt ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form