CoBank report explores outcomes of EPA’s changes to RFS

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article


Proposed changes to the nation’s biofuel blending obligations may have little impact on the ethanol industry in the next year or two, but could create uncertainty about the future size of the ethanol market and the long-term outlook for the industry, according to a new report from CoBank.

Since the Renewable Fuels Standard (RFS) was created by Congress in 2005, its purpose has been to mandate the inclusion of ever-greater volumes of biofuels into the U.S. motor fuel supply. In 2007, Congress revised the policy by doubling the corn ethanol blending requirements in the RFS. However, the Environmental Protection Agency is now proposing to pare back the RFS mandate because it can’t be met in 2014 given market conditions, including the fact that Americans are consuming less gasoline each year.

Under the EPA’s newly issued proposal, total biofuel blending obligations for 2014 would be roughly 3 billion gallons less than the standard, and the corn ethanol portion of the mandate would fall shy of the RFS by 1.4 billion gallons.

“Previously, the EPA was strongly against any alteration to the corn-based ethanol RFS provision,” said Dan Kowalski, lead economist for CoBank’s Knowledge Exchange Division. “Regardless of whether the current proposal is revised or becomes law, the implications of this shift in position are significant.”

The corn ethanol portion of the RFS will almost certainly be revised again in future years, but how it will be revised is far less certain, Kowalski said. Over the longer-term, that policy uncertainty, and the inevitability of further adjustments, will influence the size and profitability of the industry, the rate of capacity utilization, and ultimately the volume of domestic ethanol production.

According to Kowalski, the EPA proposal also sends a signal to fuel retailers that investments in higher ethanol blend infrastructure are not necessary. The proposed changes could prompt some well-positioned ethanol producers to look for opportunities to improve their economies of scale through acquisitions while some marginal producers might explore options to merge with other producers or be acquired.

The new report was issued by CoBank’s Knowledge Exchange Division, a knowledge-sharing practice that provides strategic insights regarding the key industries served by CoBank. Knowledge Exchange draws upon the internal expertise of CoBank, deep knowledge within the Farm Credit System and boots-on-the-ground intelligence from customers and other stakeholders to enhance the collective understanding of emerging business opportunities and risks.


Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left


FarmRite

FarmRite allows service providers to process more acres and to produce cutting-edge information reports in less time and with less ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form