August rains rejuvenate drought-stressed soybean crop

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

July and August rains have come just in time to preserve some of the yield potential of much of Indiana's drought-stressed soybean crop, and more was on the way as the remnants of Hurricane Isaac moved north from the Gulf Coast.

While the season-long drought has not yet ended, rains and a letup in record-setting heat have combined to rejuvenate the crop so much that soybean farmers in some areas of the state could still see trend, or more normal, yields, Purdue Extension agronomist Shaun Casteel said.

But rain from Isaac over the long Labor Day holiday weekend might not be such a good thing for the crop, which could be damaged by flooded fields and wind. Rainfall amounts were forecast from 2 inches in the far north of the state to 7.5 inches in the south, according to the Indiana State Climate Office based at Purdue University (http://www.iclimate.org ).

"We could see some standing water in areas of the state that have been getting rain, where soil moisture has been replenished," Casteel said. "Soybeans in areas of the state that haven’t had much rain can still benefit from this weekend’s rain provided it is not excessive."

Most soybean plants are shorter than normal this year, so wind would not be as much of a factor as it would have been in other years. But as soybeans have recovered from drought stress, some have elongated internodes, or the distance between trifoliate leaves, and heavy pod production on the upper two-thirds of the plants. Those top-heavy plants would be most at risk for lodging, or stalk damage, from strong winds, Casteel said.

In its August crop production report, the U.S. Department of Agriculture projected that Indiana soybean yields would average 37 bushels per acre, down 24 percent from the trend prediction of 48.7. But those estimates were based on crop conditions as of Aug. 1, and if steady rainfall continues, Casteel said there's a chance growers could make up some of the difference.

"Late-July and early-August rains have helped soybeans retain pods, and more recent rains have helped the plants fill pods," Casteel said. "At this point in the growing season, we're keeping an eye on seed size."

The average size of Indiana soybean seeds is 3,000 seeds per pound. But as it rains, Casteel said that number from this year's drought-damaged crop could notch closer to 2,500 per pound.

Short plant sizes have alarmed many growers this season, but smaller plants don't necessarily equate to smaller yields.

"Plant stature isn't a driving factor in soybean yields," Casteel said. "What's more important is having plenty of leaf area. In a more normal crop, soybean plants would have 5-6 times as much leaf area as ground area, but good yields can be obtained with leaf area that is only four times the ground area."

Casteel was quick to point out that conditions vary by region. The U.S. Drought Monitor (http://www.droughtmonitor.unl.edu/ ) update of Thursday (Aug. 30), for example, showed that most of the improvement in conditions was in northeast Indiana, where the drought was downgraded from severe to moderate, the second level of dryness. But some counties in southeast Indiana near Cincinnati deteriorated to extreme drought, the second-highest level.

"There really have been three drought scenarios in Indiana this year," he said. "Some areas have been dry all season long, some were dry early but then had timely rains, and other areas started out with rain but dried off late."

In the southwestern portion of the state, farmers have experienced exceptional drought throughout much of the season and still might not see much potential to preserve yield at this point. In parts of the state that started out dry but then got timely rains, soybeans are progressing well. This is especially true in the north-central and the northeast. The southeast had rain early but then dried off. Pod retention has been a problem in those areas.

Growers who do have soybeans to harvest will be able to take advantage of extremely high prices. Soybean futures for November 2012 and January 2013 are hovering around $17 per bushel. That's up nearly $6 per bushel from the November 2011 futures.

With prices that high, Casteel said growers need to be doing yield estimates for grain marketing.

He also said it's important for farmers to inspect plants for bean leaf beetles. The insect emerged earlier and at higher populations after a mild winter, which gave it time to produce a second generation that could now damage soybean yields.

"We need to be out in the fields looking for bean leaf beetles feeding on pods, not leaves," he said. "Treatment thresholds are going to be lower this year because soybean prices are so high."

More information about estimating soybean yields and bean leaf beetle is available in the Aug. 24 issue of Purdue Extension's Pest and Crop Newsletter at http://extension.entm.purdue.edu/pestcrop/2012/issue22/index.html


Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left


Convyers

Meridian’s conveyors deliver seed with unmatched versatility. Meridian’s transport conveyors are manufactured with heavy-duty, fully enclosed construction. Meridian’s cross cleated ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form