April weather outlook: No major changes in patterns

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

Indiana farmers getting ready for spring planting can get a good idea of what they most likely will have to work with in April just by looking across their fields now.

Wet or dry conditions they see are unlikely to change much over the month, said State Climatologist Dev Niyogi, based at Purdue University. If the soils are in good shape now, they should be ready for planting on time. But for fields that are too wet now, farmers can expect planting delays.

"Our best indication of the trend at this stage is persistence in weather patterns we have been experiencing," Niyogi said. "We do not see anything drastically changing in the short term."

Niyogi said the weather likely will change toward more favorable conditions in the latter half of the growing season when an El Niño warming trend is expected to develop.

"This change comes on slowly," he said. "It takes several months before we get a good grip on trends."

For April, the average temperature could be about 2 to 4.5 degrees below normal for the month, with the worst cases in southern counties, according to an analysis by Ken Scheeringa, associate state climatologist. He reviewed temperatures over the past century and weather models of the U.S. Oceanic and Atmospheric Administration's Climate Prediction Center, which believes that the winter pattern will continue over the U.S.

While the average temperature would be below normal, Scheeringa noted that it would show a trend toward moderation relative to the two previous months. Indiana's average temperature in February was about 8.7 degrees below normal, and March was running 6.6 degrees below normal.

Looking ahead through the end of June, Scheeringa said the average temperatures for the three months could be 0.4 degrees to 2.7 degrees below normal, with the worst cases again in the south.

Providing an outlook for precipitation is more difficult because there are no strong climatic signals for April, Scheeringa said. But he said if the cold pattern continues, Indiana could expect more of the Alberta clipper-type systems, which tend to carry less moisture when they go through the state.

Purdue Extension corn specialist Bob Nielsen said corn farmers should not be overly concerned about the weather forecast for spring planting. That is because planting date by itself has "little predictive power" for absolute yield potential.

"Yield is determined by the cumulative effects of the season-long multitude of yield-influencing factors," Nielsen said. "Growers should simply 'go with the flow' and deal with what Mother Nature gives them." 

Although soybeans typically are planted after corn, Extension soybean specialist Shaun Casteel said soybeans are more responsive to timely planting than is corn. If farmers are delayed in planting corn until late April or early May, he said soybeans should be planted at the same time.

"Late April to early May planting of soybeans is more critical for soybeans than for corn," he said.


Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (1) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left

CC    
IN  |  March, 28, 2014 at 06:35 PM

"Late April to early May planting of soybeans is more critical for soybeans than for corn" HUH???? Never heard that one before.


Blend and Bulk Tower Systems

Waconia Towers provide speed, efficiency and reliability that only gravity-fed systems can offer. Towers are available with up to 300 ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form