Alfalfa-corn rotation increases yield

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

Farmers usually enjoy a yield boost when corn is planted following an alfalfa crop. The major reasons: reduced pest and disease pressure, better soil structure that enhances root growth and water infiltration, and an altered soil microbial community, says Jeff Coulter, a corn agronomist with University of Minnesota Extension.

Alfalfa also reduces nitrogen fertilizer needs in corn. Nitrogen fertilizer for first-year corn following a good alfalfa crop can often be reduced by up to 100 percent, and by about 50 percent for second-year corn. The nitrogen passed on to the corn is largely due to additions of nitrogen-rich inputs from alfalfa to soil organic matter.

These include alfalfa leaves and stems lost during harvest, alfalfa stand losses over time, turnover of thin alfalfa roots, and substances that exude out of alfalfa roots. They mineralize rapidly after alfalfa is terminated and release nitrogen for at least two years.

With funding from the Minnesota Corn Growers Association, the Minnesota Agricultural Fertilizer Research and Education Council, and the Minnesota Agricultural Water Resource Center, Coulter and co-workers recently completed on-farm research that confirms the nitrogen "credits" from alfalfa to corn. From 2009 to 2011, research on first-year nitrogen credits was conducted on 31 farms across Minnesota and Wisconsin with medium- to fine-textured soils. Only three of the 31 farms had increases in grain yield from adding nitrogen fertilizer to first-year corn after alfalfa. The three responsive farms had fine-textured soils and excessive early-season precipitation, which likely slowed mineralization. It was also found that nitrogen fertilizer rates could be reduced if the nitrogen was sidedressed rather than applied near planting.

In 2011 and 2012, research on second-year nitrogen credits was conducted on 11 farms in Minnesota with medium- to fine-textured soils. Surprisingly, four of 11 farms required no nitrogen fertilizer to maximize grain and silage yield. The economically optimum nitrogen rate varied among the seven responsive farms, but was often at least half as large as that for continuous corn. As in first-year corn, sidedress applications of nitrogen allowed growers to reduce fertilizer rates without sacrificing yield.

"Farmers are our active research partners, and help us perform the field operations," Coulter says. To help spread the word on the results, nine on-farm field days were held over the last three years and were attended growers and farm advisors managing over one million acres of farmland.

More details on University of Minnesota Extension corn production are available at z.umn.edu/corn.


Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left


Quickveyor

Made of high quality 304 stainless steel, the Quickveyor is one of the strongest trailers on the market. It’s belt ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form