ARS scientists help improve soil carbon calculations

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

A potential source of error in calculating soil carbon budgets has been identified by scientists at the U.S. Department of Agriculture (USDA).

Agricultural Research Service (ARS) soil scientist Hero Gollany has used these findings to refine methods for assessing farming practices that retain carbon in the soil and thus mitigate carbon emissions that contribute to global climate change. ARS is USDA's chief intramural scientific research agency, and these findings support the USDA priority of responding to climate change.

Rates of soil carbon retention, known as sequestration, are often measured and estimated by tracking changes in total soil carbon over time. Carbon from crop residues or other decaying plant material is present in soil samples collected for these sequestration studies. But this "accrued" carbon is not actually sequestered in the soil until after the carbon becomes attached to soil mineral particles, a process that can take several decades.

Until that happens, the accrued carbon from decomposing plant material can readily be lost from the soil, because it is not bound or associated with soil particles. Inadvertently adding the accrued carbon to measurements of sequestered carbon results in overestimates of how agronomic practices affect sequestration levels.

Gollany and Washington State University soil microbiologist Ann-Marie Fortuna used data from another soil carbon field study to see how levels of a specific type of carbon called "light-fraction" carbon affected measurements. Using this method, the scientists determined that carbon sequestration levels measured in the study included carbon from fine crop residue materials that passed through sieves during sample processing—carbon that had accrued in the soil, but was not yet sequestered via decomposition.

This accrued carbon ranged from 13 percent to 19 percent of the total soil carbon in the samples. This, in turn, skewed attempts to use carbon data from the samples to model soil carbon sequestration levels.

Gollany, who works at the ARS Soil Conservation Research Unit in Pendleton, Oregon, published her findings in 2013 in the Soil Science Society of America Journal.


Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left


Kinze 1500 Grain Cart

The Kinze 1500 Grain Cart is engineered for speed and reliability required of custom harvesters. Load up to 1500 bushels ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form