EPA sends 2014 biofuel targets to White House

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

The U.S. Environmental Protection Agency on Friday sent its final targets for 2014 biofuel use to the White House as the long-delayed rule enters its last round of review before public release.

The Obama administration will now face a last-ditch round of lobbying from biofuel producers seeking changes to the rule and opponents of the renewable fuels mandate who hope regulators will stand firm on proposed cuts to the targets.

It is unclear how long the rule will remain at the White House's Office of Management and Budget. Such reviews can drag on for months, but OMB can move more quickly at times. Last year, the agency took just over 30 days to send the final targets back to EPA.

"We would not be surprised if OMB were to replicate last year's rapid turnaround," ClearView Energy Partners said in a research note.

EPA angered biofuel producers in November when it issued a draft 2014 rule slashing federal requirements for use of ethanol and biodiesel in U.S. fuel supplies. The biofuel producers warned that unless EPA reversed course, investment in their industry would dry up.

Biofuel industry sources expect the targets will be higher in the final rule, but likely still far less than Congress intended when it formulated the Renewable Fuel Standard in 2007.

With the rule nearly nine months behind schedule, biodiesel producers have struggled with low fuel prices and market uncertainty.

"We can begin to reverse that damage with a meaningful increase in the biodiesel volume that is finalized as quickly as possible," said Anne Steckel, of the National Biodiesel Board.

Citing concerns that U.S. energy markets could not absorb the levels of biofuels called for by the law, the EPA lowered the 18.15 billion gallons (68.7 billion liters) of biofuels mandated for use in 2014 to 15.21 billion gallons.

The agency said on Friday that it remains committed to biofuels and said its goal is to put the renewable fuel program "on a path that supports continued growth."

The proposed cuts to the program were a win for the oil industry, which has long sought to repeal the federal biofuel mandate. They argue the law requiring increasing amounts of biofuels to be blended into gasoline and diesel each year places a crippling financial burden on refiners.

Compliance costs for the program rose dramatically last year on concerns the nation would hit the so-called blend wall, the point when the law would require ethanol to be blended into gasoline at levels higher than the 10 percent mix that dominates U.S. gas stations.

The American Petroleum Institute urged the administration to finalize the 2014 rule as quickly as possible, warning that delays could "harm consumers" and make it "harder to produce the fuels Americans need."


Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left


1325 Bushel Grain Cart

Equipped with a 22” computer balanced auger with 5/16” flighting,the unloading speed is 50% faster than smaller grain carts with ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form