Regulations needed to identify potentially invasive biofuel crops

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

If the hottest new plant grown as a biofuel crop is approved based solely on its greenhouse gas emission profile, its potential as the next invasive species may not be discovered until it's too late. In response to this need to prevent such invasions, researchers at the University of Illinois have developed both a set of regulatory definitions and provisions and a list of 49 low-risk biofuel plants from which growers can choose.

Lauren Quinn, an invasive plant ecologist at U of I's Energy Biosciences Institute, recognized that most of the news about invasive biofuel crops was negative and offered few low-risk alternatives to producers. She and her colleagues set out to create a list of low-risk biofuel crops that can be safely grown for conversion to ethanol but realized in the process that regulations were needed to instill checks and balances in the system.

"There are not a lot of existing regulations that would prevent the planting of potentially invasive species at the state or federal levels. For example, there are currently only four states (Florida, Mississippi, Oregon, and Maryland) that have any laws relating to how bioenergy crops can be grown and that include any language about invasive species-and, for the most part, when those words do appear, they are either not defined or poorly defined," said Quinn.

In approving new biofuel products, Quinn said that the EPA doesn't formally consider invasiveness at all - just greenhouse gas emissions related to their production. "Last summer, the EPA approved two known invaders, Arundo donax (giant reed) and Pennisetum purpurem (napier grass), despite public criticism," added U of I professor of agricultural law A. Bryan Endres, who co-authored the research to define legislative language for potentially invasive bioenergy feedstocks.

Part of the problem is that there is no clear scientific definition of what it means to be invasive. The team of researchers used fundamental biological, ecological, and management principles to develop definitions for terminology commonly used to describe invasive species.

"Our definition of invasive is 'a population exhibiting a net negative impact or harm to the target ecosystem,' for example," Quinn said. "We want to establish guidelines that will be simple for regulators and informed by the ecological literature and our own knowledge. We also need to recognize that some native plants can become weedy or invasive. It's complicated and requires some understanding of the biology of these plants."

Quinn said that ideally the definitions and suggested regulations could become part of a revised Renewable Fuels Standard administered by EPA, which would require Congress to make the changes. The proposed regulations could also be adopted at the state level.

"Some of the biofeedstocks currently being examined by the EPA for approval, like pennycress, have a high risk for invasion," Quinn said. "Others have vague names such as jatropha with no species name, which is problematic. For example, there are three main Miscanthus species but only sterile hybrid Miscanthus × giganteus types are considered low risk. However, the EPA has approved "Miscanthus" as a feedstock without specifying a species or genotype" Quinn said. "That's fine for the low-risk sterile types but could mean higher-risk fertile types could be approved without additional oversight."

According to Quinn, the white list, which includes 49 low-risk feedstock plants, will serve to clear up the confusion about plant names. The list was developed using an existing weed risk assessment protocol, which includes 49 questions that must be asked about a particular species based on its biology, ecology, and its history of being invasive in other parts of the world.

"Those questions are difficult to answer for new taxa, including plants that haven't been around long or have just recently been developed by breeders," Quinn said. "This will be the first time that they are out in the environment so we don't know what their potential for invasiveness is. But the white list offers plenty of choices of plants that are already commercially available, and the feedstocks on the list have a number of different industrial uses."

Quinn stressed that the native plants that are included in the white list are only recommended as the native genotypes grown in their native region, because although a plant may be native to a part of the United States, it could be considered invasive if grown in a different region.

"For example, Panicum virgatum is the variety of switchgrass that is low risk everywhere except for the three coastal states of Washington, Oregon, and California, but future genotypes that may be bred with more invasive characteristics, such as rapid growth or prolific seed production, may have higher risk."

The researchers believe that the white list provides producers with clearly identified low-invasion risk options and may reduce conflicts between objectives for increasing renewable fuel production and reducing unintended impacts and costs resulting from the propagation of invasive plants.

"Resolving regulatory uncertainty: legislative language for potentially invasive bioenergy feedstocks" was published in an issue of GCB Bioenergy. Co-authors include Elise Scott and James McCubbins from the Energy Biosciences Institute, A. Bryan Endres and Thomas Voigt from the University of Illinois, and Jacob Barney from Virginia Tech.

"Bioenergy feedstocks at low risk for invasion in the U.S.: A 'white list' approach" was published in Bioenergy Research. Co-authors include Aviva Glaser from the National Wildlife Federation, Doria Gordon from the Nature Conservancy, and Deah Lieurance and Luke Flory from the University of Florida.
Funding for both research projects was provided in part by the Energy Biosciences Institute at the University of Illinois.


Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left


Quickveyor

Made of high quality 304 stainless steel, the Quickveyor is one of the strongest trailers on the market. It’s belt ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form