NASA sponsors AgriLife research of drought-stricken trees

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

Severe drought across Texas since 2011 has produced a unique opportunity for Texas A&M AgriLife Research scientists to gain a greater understanding of the decaying process of trees and the effects on the surrounding ecosystem.

Three AgriLife Research scientists in the Texas A&M University ecosystem science and management department in College Station have been approved for a three-year, $347,426 grant under the Rapid Response and Novel Research in Earth Science program operated by NASA.

Dr. Sorin Popescu will lead the project, titled “Using LiDAR to develop a climate-driven model of the disintegration and decay of trees killed during a severe drought.” He will be joined by Dr. Georgianne Moore and Dr. Jason Vogel.  

Popescu explained that 2011 and 2012 were very difficult years for forests due to drought. During that time period, precipitation for most of Texas was 50-75 percent less than its long-term average.

“This drought’s severity and extent was greater than any other drought that had occurred in the region during the previous 500 years,” he said. “Our forests have suffered tree mortality that was about nine times above normal levels, and the largest trees of the region died at disproportionately high levels.”

Popescu said under the new grant-funded project, the rate of tree disintegration will be monitored through a combination of airborne, unmanned aerial vehicle lidar and terrestrial lidar scanning. Lidar, from Light Detection and Ranging, is a remote-sensing technology that uses laser light to measure the distance from sensor to target and create a three-dimensional model of forest vegetation, in this case.

“Wood decomposition will be tracked using on-site measurements of local climate and tissue decay,and vegetation regrowth estimated with allometric equations,” Moore said.

A site network, already designed by Dr. Chris Edgar of the Texas A&M Forest Service, will facilitate immediate implementation of the research.

“This is critical as the dead trees enter a transitional phase from standing dead to coarse woody-debris,” Vogel said.

Heexplained that tree mortality alters ecosystem processes, but when the mortality is extensive, as is the case for drought, there are significant measurement and modeling difficulties posed to ecosystem scientists.

Two of the difficulties are: passive remote sensing cannot easily differentiate a single dead tree from a living forest or accurately depict a change in a tree’s three-dimensional structure; and the disintegration and decay of standing trees is difficult to model because the elevated tissues cannot be directly sampled and wood decay may occur at different rates than tissues found on the ground.

Popescu said the technology and modeling structure to overcome these difficulties has been developed.

“Because the newly dead trees in Texas are quickly transitioning to fallen wood, we need to immediately apply these techniques to this extensive, catastrophic event,” he said. “By implementing the study immediately, we will be able to leverage an existing study design and take advantage of the large number of dead trees on the landscape.”

The scientists expect their research to have a long‐lasting impact because it will provide the foundation for understanding how these kinds of events alter future forest structure and function.

Also, they said, the remote sensing of tree disintegration and decay will be novel and linked to potential changes in climate, making the results potentially transferable to other forest ecosystems.


Prev 1 2 Next All



Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left


X-TENDED REACH GRAIN CARTS

YOUR BEST HARVEST IS NOW WITHIN REACH J&M introduces their patented line of X-tended Reach grain carts, featuring a frontfolding single ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form