2013 corn and soybean acreage and yield prospects

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

Production prospects for corn and soybean in the United States in 2013 will hinge primarily on the nature of the growing season and yield prospects, according to University of Illinois agricultural economist Darrel Good. The magnitude of planted acreage, however, will provide the basis for anticipating total production. Likely acreage has been the topic of discussion all winter, with projections in a fairly wide range.

Good said that anticipating planted acreage of the two crops is complicated by a number of factors. The first issue is the magnitude of acreage available for planting of all spring crops. Some additional cropland acreage has become available in 2013 due to fewer acres being enrolled in the Conservation Reserve Program. That acreage is reported at 27.04 million acres, 2.62 million fewer than enrolled last year.

“How much of that reduction will be planted to crops in 2013 is not known,” Good said. “Winter wheat seedings reported by the USDA in January were nearly 600,000 acres larger than seedings of a year ago. The acreage of soft red winter wheat is up about 1.3 million acres, while seedings of other classes of wheat were less than those of a year earlier. Some of the increase in soft red winter wheat acreage may be double-cropped with soybeans. The condition of the hard red winter wheat crop going into dormancy this winter was generally quite poor. While ratings have improved somewhat, the poor condition suggests that more than the normal amount of that acreage may be abandoned. Depending on moisture conditions going forward, some abandoned acres may get replanted to other crops this spring,” he said.

Additionally, the acreage of spring-planted crops will be influenced by spring weather conditions and the magnitude of prevented plantings, Good reported. Prevented planted acres totaled only 1.24 million acres in 2012, after being quite large in 2009, 2010, and 2011. In those three years, prevented plantings were reported at 4.18 million, 6.89 million, and 9.62 million acres, respectively. Prospects for prevented planting this year once again focus on the northern Plains states, where snow cover suggests the potential for spring flooding. An increase in prevented plantings would presumably reduce the total acreage planted this spring. The potential magnitude of that acreage will not be known for several weeks.

The second issue surrounding acreage is the share of the total available acreage that will be planted to individual crops. “In general, it is believed that corn and soybeans will be very competitive with cotton and rice acreage in the Delta and portions of the Southeast,” Good said. “As a result, corn and soybeans are expected to garner a larger share of the acreage pie in those areas. In the northern Plains states, the relevant competition will be between spring wheat, corn, soybeans, and other oilseed crops. The outcome of that competition may be mostly a function of spring weather,” he said.

Taken together, the issues Good described suggest that total corn and soybean acreage could be near the level of 2012. Early expectations were for corn acreage to increase modestly and for soybean acreage to be almost unchanged. Changing price relationships and a more favorable spring price for soybeans for crop revenue insurance may have altered those expectations slightly.

Good said that the USDA will report the results of the spring planting survey in the Prospective Plantings report to be released on March 28. “Intentions for corn and soybean plantings, equal to or slightly larger than those of last year, would not be a surprise,” Good said. “Given that planting of those crops in the Corn Belt will be later than last year’s planting, there is more opportunity for actual plantings to deviate from intentions this year. Weather conditions, planting progress, and price relationships will be monitored closely to judge potential changes,” he said.

The later planting this season is also generating some further discussion of yield potential, particularly for corn. “As learned again last year, corn yields are mostly determined by summer weather conditions,” Good said. “However, agronomic research clearly indicates that planting date, everything else being equal, can have some influence on yield outcome. In particular, there is an increasingly large yield penalty associated with corn planted late. That same research suggests that maximum yield potential is associated with corn planted in a fairly large window of time. For much of the Midwest, that optimum planting window is from about mid-April through early May with increasingly large yield penalties after mid-May.

“At this juncture, the potential for U.S. average corn and soybean yields near trend value in 2013 are still in place,” Good concluded. “Still, the likelihood of some planting delays, along with lingering drought conditions in western areas, provides the basis for considerable yield uncertainty for corn in 2013. If these conditions persist, new-crop corn futures could regain some of the losses occurred since late 2012. For those with crop revenue insurance, pricing opportunities for both corn and soybeans should probably be judged in context of the spring crop insurance prices, with prices well above those levels representing sales opportunities,” he said.

Prev 1 2 Next All

Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...

Comments (0) Leave a comment 

e-Mail (required)


characters left


Made of high quality 304 stainless steel, the Quickveyor is one of the strongest trailers on the market. It’s belt ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form