Corn planted acreage, yield estimated up from last month

decrease font size  Resize text   increase font size       Printer-friendly version of this article Printer-friendly version of this article

The U.S. corn production forecast for 2012/13 is raised 55 million bushels this month to 10,780 million, largely based on improvements in the estimated corn yield. The January yield estimate is raised 1.1 bushels per acre to 123.4. This gain is enough to offset the slight decrease in harvested acres to 87.4 million acres, down from the December estimate of 87.7 million acres.

The decline in 2012/13 harvested acres comes despite a small increase in planted acres. The 2011/12 corn production figure is also revised upward by 1.2 million bushels to 12,360 million bushels. Relative to last year’s production estimate, the 2012/13 corn crop is forecast to be 1,580 million bushels smaller, a contraction of nearly 13 percent. The January estimate for 2012/13 beginning stocks is increased by 624,000 bushels to a total of 989 million.

Projected corn feed and residual use for 2012/13 is raised 300 million bushels to 4,450 million. December 1 stocks indicated a September-November feed and residual estimate of 2,053 million bushels, sharply higher than expected, and up 228 million from the same quarter for 2011/12. The large first-quarter feed and residual implies likely new crop feeding before September 1. Feed and residual for 2011/12 is estimated at 4,548 million bushels, up 0.5 million from last month’s estimate, reflecting the higher production and carryout projections.

U.S. corn exports for 2012/13 are lowered 200 million bushels to 950 million as year-to-date shipments lag and larger expected supplies and exports for South America this month put further pressure on U.S. export prospects. The combination of reduced exports and increased feeding serve to increase projected total corn use for 2012/13 by 100 million bushels to 11,267 million.

Corn ending stocks for 2012/13 are expected to be 602 million bushels, down 44 million from last month as the increase in production is more than offset by higher feed and residual use. Ending stocks are down 387 million bushels from last year. The stocks-to-use ratio is projected at 5.3 percent, the lowest level since 1995/96, when the ratio dropped to 5.0 percent.

Based on the increase in production and reported prices received by farmers to date, the projected 2012/13 season average farm price for corn is unchanged at $6.80 to $8.00 per bushel. The average farm price midpoint is forecast at $7.40 per bushel. Producer deliveries of corn that was forward contracted earlier in the season and at prices below current market values, are reducing the monthly farm prices reported by USDA’s National Agricultural Statistics Service (NASS).

Changes are also made this month to the 2011/12 corn supply-and-use tables. Corn ending stocks are increased 0.6 million bushels to 989.0 million. However, production is revised up more than ending stocks, resulting in an increase in feed and residual to 4,547.7 million bushels.


Buyers Guide

Doyle Equipment Manufacturing Co.
Doyle Equipment Manufacturing prides themselves as being “The King of the Rotary’s” with their Direct Drive Rotary Blend Systems. With numerous setup possibilities and sizes, ranging from a  more...
A.J. Sackett Sons & Company
Sackett Blend Towers feature the H.I.M, High Intensity Mixer, the next generation of blending and coating technology which supports Precision Fertilizer Blending®. Its unique design allows  more...
R&R Manufacturing Inc.
The R&R Minuteman Blend System is the original proven performer. Fast, precise blending with a compact foot print. Significantly lower horsepower requirement. Low inload height with large  more...
Junge Control Inc.
Junge Control Inc. creates state-of-the-art product blending and measuring solutions that allow you to totally maximize operating efficiency with amazing accuracy and repeatability, superior  more...
Yargus Manufacturing
The flagship blending system for the Layco product line is the fully automated Layco DW System™. The advanced technology of the Layco DW (Declining Weight) system results in a blending  more...
Yargus Manufacturing
The LAYCOTE™ Automated Coating System provides a new level of coating accuracy for a stand-alone coating system or for coating (impregnating) in an automated blending system. The unique  more...
John Deere
The DN345 Drawn Dry Spreader can carry more than 12 tons of fertilizer and 17.5 tons of lime. Designed to operate at field speeds up to 20 MPH with full loads and the G4 spreader uniformly  more...
Force Unlimited
The Pro-Force is a multi-purpose spreader with a wider apron and steeper sides. Our Pro-Force has the most aggressive 30” spinner on the market, and is capable of spreading higher rates of  more...
BBI Spreaders
MagnaSpread 2 & MagnaSpread 3 — With BBI’s patented multi-bin technology, these spreaders operate multiple hoppers guided by independent, variable-rate technology. These models are built on  more...


Comments (0) Leave a comment 

Name
e-Mail (required)
Location

Comment:

characters left


LPV Seed Treater

The LPV Seed Treater has set a new standard boasting three configurable weighing methods for any-sized operation, a standard 42” ... Read More

View all Products in this segment

View All Buyers Guides

Feedback Form
Feedback Form