Tenders, Trucks And Trailers

ST350 Bulk Seed Tender

The KBH ST350 Bulk Seed Tender has a 245 bushel, two compartment hopper and a KSI cleated belt unload for fast, gentle delivery of corn, soybean, wheat or virtually any other seed. KBH’s unique self-contained hydraulic system, which eliminates belts, pulleys and clutches, is powered by an electric start Honda engine and can be run at a variety of speeds without manipulating the engine’s throttle.

Side Discharge Dry Tender

The KBH Dry Fertilizer Tender features many options, including rear or side discharge, mild, stainless or poly cupped augers, Deutz engines or wet kit, two or three hopper beds, variety of trailer lengths (32’, 38’ or 42’). Standard features include hydraulic hopper doors, hydraulic clean out doors, spring assisted roll tarps, central lubricating station, front and rear stainless fenders, and hopper vibrators.

Rear Discharge Trailer Tender

The All New 2014 Adams Rear Discharge Trailer Tender with standard features that include 12” Rise SRT II Roll tarp for increased payload and operation, stainless steel augers and stainless steel auger tube and pipe, front and rear fenders, stainless steel front and rear fenders, stainless steel fuel tank, hydraulic bottom dump doors, remote grease tubes, stainless steel mid bearings, and 40 hp Deutz air-cooled engine.

Seed Express 400

Introducing the larger capacity Self-Load Seed Express Tenders from Meridian, the next generation of seed handling. The new Seed Express 400 is a ground breaking innovation from Meridian that takes on-farm seed tendering to a new level of versatility. Its conveyor design allows the user to unload the tender, fill the tender, and also allow the user to use the conveyor independently for all your on-farm needs.

24FT Trailer Tender

The Doyle 24 FT Trailer Tender was designed for efficiency and ease of operation. Its modular, multi-hopper design allows the company to customize units, whether the buyer needs the standard three 258 cubic-foot bins, or the optional six 129-cubicfoot bins, or any combination in between. Bins are constructed of 12 gauge, 304 stainless steel and have a 40-degree side slope. Hydraulically operated, the side discharge auger consists of a 20-foot stainless steel tube with stainless steel flighting.

16 FT Side Discharge Truck Mounted Tender

Doyle’s 16 FT side discharge truck mounted tender features four modular compartments (129 cubic feet each) in a 12 gauge 304 stainless steel. Hoppers have a 40-degree slope. Hydraulically raised and lowered, the 19-foot auger reaches a 14-foot discharge height, with a 1.75 ton-per-minute discharge rate. The main frame is made of heavy duty mild steel square tubing with a mild steel “boxed” support arm and cross braces.

Willmar® 1600 Rear-Discharge Tenders

Willmar’s truck-mounted 1600 rear discharge tender is ideal for large farming operations, custom applicators and commercial fertilizer dealers. With a large-capacity hopper (500 cu. ft. struck and 560 cu. ft. heaped) and two compartments that feed into one auger that comes either 19 or 21 feet long, this tender can carry nearly any single, dry-material product and load any applicator or planter at up to two tons per minute. Sloped, stainless steel hopper sides provide quick and thorough clean-out.

BTS295, BTS410 and WT290/Bulk and Commercial Seed Tenders

The BTS-295 is our most popular model in the trailer mounted models which features 295 units of capacity in 2 equally split tanks. The unloading conveyor moves 1,500 lbs of product/minute. This tender will handle your centre fill or box planter needs. The conveyor can be swiveled 152 degrees. There are remote control options from basic to all inclusive. Features like site glasses and roll tarp are standard on this unit.

Willmar® 16/24-Ton Side-Shooting Tenders

Using the right tender can make all the difference to your bottom line when you’ve got a load of material to move. Willmar’s 24-ton side-shooting tender can be trailer mounted and move up to two tons of material a minute with a large-diameter, 10-inch auger that comes either 17 or 20 feet long. Six compartment hoppers can carry a variety of materials, with steep, 40-dgree, sloped sides for quick material dispensing. The 24-ton side-shooting tender holds an incredible struck capacity of 774 cu. ft. (885 cu. ft. heaped).


to our redesigned homepage!

Scroll Down for more stories

Feedback Form
Generate Leads